In the process of beverage production, water is the main raw material for production and processing. It can be seen that the quality of water has a very important impact on the taste of beverages. Therefore, strict treatment of water used in beverage production is necessary to meet the requirements of beverage production technology. The water equipment used in the beverage industry adopts reverse osmosis membrane separation technology and disinfection and sterilization devices to ensure the effluent quality of the equipment.

Raw water tank → raw water booster pump → multi-media filter → activated carbon filter → cation resin softener → precision filter → first stage RO reverse osmosis system → second stage RO reverse osmosis system → water air mixer → ozone sterilizer → stainless steel pure water tank → fully automatic filling line

Pre installed 5 μ micro filters protect the high-pressure pump and reverse osmosis membrane from damage caused by particles or other hard objects. The low voltage switch protects the high voltage pump from damage due to water supply interruption. An efficient and low-noise high-pressure pump reduces operating noise and electricity consumption. The roll type composite membrane with good desalination effect and low operating pressure improves the quality of produced water and reduces operating costs, and has a long service life. Both produced water and concentrated water are equipped with flow meters to monitor and adjust the operating water output and system recovery rate. The conductivity meter continuously monitors the quality of the produced water. The inlet and outlet pressure gauges continuously monitor the pressure difference of the reverse osmosis membrane and indicate when cleaning is needed. Automatic water shut-off valve to prevent water from continuing to flow in during shutdown. Quickly flush the valve and regularly flush the membrane surface. Reduce the speed of pollution.

Single level recovery rate:>75%

Organic matter removal rate:>99%

Inlet water temperature: 15-45 ℃

Environmental temperature: 5-45 ℃

Water supply pressure: ＞ 0.2MPa

Control method: customized according to customer requirements

Power supply: 380VAC 50Hz

Primary RO water conductivity<10 μ s/[email protected] ℃ (raw water conductivity<500 μ s/[email protected] ℃)

The conductivity of the secondary RO produced water can be less than 2 μ s/[email protected] ℃