ZG-I Spiral Fine Grid Machine-Fornitore globale

Product Groups

Firm Information

Transaction Level

VIP member
Contact
Phone
Address

103rd Floor, No.16 North Industrial Zone, Haigang District, Qinhuangdao City

Contact Now

ZG-I Spiral Fine Grid Machine

【 Overview 】 The rotary fine grid cleaning machine is a new type of solid-liquid separation and environmental protection equipment that integrates thr

Contact Supplier

More Products

Product details

[Overview]

The rotary fine grid cleaning machine is a new type of solid-liquid separation and environmental protection equipment that integrates three functions: grid, conveyor, and screw press. The spiral fine grid machine can be installed directly in the water channel or in the container box. Wastewater flows into the front end of the spiral fine grid cleaning machine's grid basket, flows out through the grid gap, and the filter residue is trapped in the grid basket. The accumulated filter residue on the grid bars of the rotary drum fine grid machine forms a filter layer to further filter, thereby improving the filtration efficiency of the spiral fine grid machine filter residue. When the water level difference between the front and rear of the spiral fine grid machine basket reaches the set value, the deceleration motor automatically starts, driving the slag cleaning rake to rotate. Its slag cleaning teeth extend between the grid bars to remove all the filter slag. When the drum grid rotates to the vertical position, the filter slag automatically falls into the hopper at the center of the lower end of the screw, is transported by the screw, pressed at the same time, and finally falls into the material box or conveyor for external transportation. In order to clean the filter residue on the teeth, the cleaning rake can automatically reverse by 15 degrees. When passing through a cleaning gear plate, it can automatically clean the remaining residue on the cleaning rake to prevent the spiral grid cleaning machine from malfunctioning.
The filter residue of the rotary drum grille is pressed and dehydrated during the transportation process, with a solid content of up to 35% -45%. The dry residue has a small volume, low pollution, and is easy to transport for external treatment.
The filter slot size of the spiral grid machine's filter frame is 6 to 12mm, with diameters ranging from 600mm to 3000mm. The maximum processing capacity of the rotating grid can reach 237600m3/h.

[Model]

[Features]
1. The spiral grille machine is made of all stainless steel and has a compact structure.
2. The spiral grid machine has a complete structure, easy installation, and fully automatic control.
3. The spiral grille cleaning machine has low power, low speed, energy saving, no wear, and low noise.
4. The spiral grille cleaning machine operates in a fully enclosed manner, with no odor or leakage.
5. The spiral fine grid machine has high operating efficiency, excellent comprehensive performance price ratio, and fast investment recovery.

[Water flow rate]

Model specificationsZG-I			600	800	1000	1200	1400	1600	1800	2000	2200	2400	2600	2800	3000
Liquid flow rate（m/s）			1.0
Water flow rate (m3/h)	pitch (mm)	6	314	590	962	1263	1892	2475	3105	3775	4568	5757	7765	9372	11290
		8	357	676	1080	1414	2145	2778	3505	4250	5130	6477	8773	10554	12740
		10	385	731	1172	1534	2325	3021	3787	4594	5546	7000	9482	11439	13795
		12	406	769	1238	1625	2487	3183	4000	4857	5900	7425	10042	12090	14586

Model specificationsXGZG-I	600	800	1000	1200	1400	1600	1800	2000	2200	2400	2600	2800	3000
Diameter of grating cylinderD(mm)	600	800	1000	1200	1400	1600	1800	2000	2200	2400	2600	2800	3000
Fence tube lengthl(mm)	500	620	700	800	1000	1150	1250	1350	1450	1650	1950	2150	2400
Diameter of conveying piped(mm)	219	273	273	300	300	360	360	500	500	500	500	700	700
channel widthB(mm)	650	850	1050	1250	1450	1650	1850	2070	2270	2470	2670	2870	3070
The highest water level in front of the fenceH4(mm)	350	450	540	620	750	860	960	1050	1150	1280	1490	1630	1800
installation angle	35℃
Channel depthH1(mm)	H1=600～3000
Slag discharge heightH2(mm)	Design according to user requirements
H3(mm)	Determine based on the form of the reducer
Total height of equipment installationH(mm)	H=H1+H2+H3
installation lengthA(mm)	A=H×1.43-0.48D
Total length of equipmentL(mm)	L=H×1.743-0.75D

Online inquiry

Contacts
Company
Telephone
Email
WeChat
Verification Code
Message Content