VIP member
ZARP electric eccentric rotary valve
ZARP electric eccentric rotary valve
Product details
| product name: | Electric eccentric rotary valve | Product model: | ZARP |
| Drive mode: | Electric | Connection form: | flange |
| structural style: | partial | Sealing material: | rubber |
| Pressure Range: | 1.6~4.0MPa | Nominal diameter: | DN25-DN300 |
| Common materials: | Carbon steel, stainless steel | technical advice: |
1、 Introduction to ZARP Electric Eccentric Rotary Valve
ZARP ElectricEccentric rotary valveThe cam deflection regulating valve consists of an actuator and an eccentric rotary valve, and is a type of valve that controls fluid by rotating a portion of the ball valve plate around an eccentric axisAngular stroke valveThe rotation center of the valve core is not concentric with the rotation axis, which can reduce wear and prolong service life. There is a guide wing at the rear of the valve core, which is conducive to stable fluid flow and has good stability. Secondly, there are also characteristics such as high traffic and wide adjustable range. Widely used in industries such as petroleum, chemical, power, metallurgy, steel, papermaking, pharmaceuticals, food, textiles, and light industry.
Valve core type: eccentric bow shaped globe
Nominal diameter: DN50~300 NPS 2 "~12"
Nominal pressure: PN16~40 CLASS 150LB~300LB
Connection methods: flange FF, RF, RTJ, etc
Clamp type
Valve cover form: integrated type
Packing: V-shaped polytetrafluoroethylene, flexible graphite packing, etc
Sealing gasket: metal clip graphite seal
Execution mechanism: Pneumatic: Pneumatic piston actuator, Pneumatic diaphragm actuator
Electric: DTR series, 3810L series
Surface coating: Green acrylic polyurethane enamel
2、 ZARP Electric Eccentric Rotary Valve Standard Specification
Valve body type: straight through cast eccentric spherical valveValve core type: eccentric bow shaped globe
Nominal diameter: DN50~300 NPS 2 "~12"
Nominal pressure: PN16~40 CLASS 150LB~300LB
Connection methods: flange FF, RF, RTJ, etc
Clamp type
Valve cover form: integrated type
Packing: V-shaped polytetrafluoroethylene, flexible graphite packing, etc
Sealing gasket: metal clip graphite seal
Execution mechanism: Pneumatic: Pneumatic piston actuator, Pneumatic diaphragm actuator
Electric: DTR series, 3810L series
Surface coating: Green acrylic polyurethane enamel
3、 ZARP Electric Eccentric Rotary Valve Model Compilation
| Z | actuator | R | structural style | -Nominal pressure | body material | Nominal Diameter |
| Z seriesself-actuated regulator |
S: Pneumatic piston actuator J: Pneumatic thin film actuator A: Electric DTR actuator R: Electric 3810R actuator |
R angular travel |
P: Standard full chamber eccentric rotary control valve |
PN16=16 CL150LB=150 LB |
C=WCB |
DN50= DN50 |
4、 Performance of ZARP electric eccentric rotary valve
| Traffic characteristics |
Approximately equal percentage
|
|
| Adjustable range | Full cavity type 100:1 Shrinkage cavity type 40:1 | |
| Rated CV value | Full cavity CV 14~1750 Reduced cavity CV 6-700 | |
| trip | Fully open at 60 ° | |
| Allowable leakage amount | Hard seal: Class IV (0.01% valve rated capacity) Soft seal: Class VI (bubble level) | |
| Basic error% | Pneumatic ± 2 | Electric ± 2.0 |
| Return difference% | Pneumatic ≤ 1.5 | Electric ≤ 1.0 |
| Dead zone% | Pneumatic ≤ 0.6 | Electric ≤ 1.0 |
5、 Selection parameter table for ZARP electric eccentric rotary valve
| Nominal diameter DN (mm) | 25 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | |
| Rated flow coefficient Cv | Full cavity type | 14 | 30 | 55 | 100 | 135 | 230 | 320 | 500 | 850 | 1300 | 1750 |
| Shrinkage type | 6 | 12 | 20 | 40 | 54 | 92 | 128 | 200 | 340 | 520 | 700 | |
| Electric actuator | ||||||||||||
| model | Torque (N.M) | PTFE packing, metal seal, allowable pressure difference unit MPa | ||||||||||
| 3810R-10 | 100 | 10 | 7.5 | 4.0 | ||||||||
| 3810R-30 | 300 | 5 | 4.5 | 2.3 | 2.1 | 1.9 | ||||||
| 3810R-50 | 500 | 1.0 | 0.6 | 0.4 | ||||||||
Online inquiry

