Detailed Introduction
YL-S20T Material Testing Machine
purpose
The material testing machine is specialized in testing the strength of various materials, finished products, semi-finished products, and monomers. It selects various types of fixtures, molds, and can be used for tensile strength, compressive strength, bending strength, tensile strength, elongation, tearing, peeling, stress, strain, shear strength, etc. It is designed for the food industry to measure the top compression strength, top compression deformation, and compressive strength of packaging containers. Suitable for use in industries such as metal, packaging, food, aviation, rubber and plastic, wire and cable, leather, chemical products, etc.
Compliant with standards
GB/T2792,ASTM D3330,GB/T 12914-1991,GB 13022-91,GB/T1040-92,GB2792-81,GB/T 14344-9,GB/T 2191-95,QB/T 2171-95
Technical Parameter
Capacity selection: | 10N, 20N, 50N, 100N, 200N, 500N, 1KN, 2KN, 5KN (optional dual capacity configuration) |
---|---|
monitor: | Touch screen display mode |
Power resolution: | 1/120,000 |
Strength accuracy: | 0.5% |
Travel resolution: | 1/120,000 |
Test project: | Tensile strength, peel strength, pressure, bending resistance, stress, top compression strength, top compression deformation, tear strength, tensile strength, etc |
Control method: | Touch screen display and operation |
Experimental itinerary: | 450mm |
Experimental width: | Ø140mm |
Experimental speed: | 0.01~500mm/min, can be set arbitrarily |
Power unit conversion: | kgf,gf ,N,kN,Ibf |
Switching stress units: | MPa,kKPa,kgf/cm2,Ibf/in2 |
Transformation unit switching: | mm,cm,in |
Shutdown mode: | Overload stop, emergency stop button, automatic stop due to specimen damage, automatic stop due to upper and lower limit settings |
Machine size: | 65×26×105cm (W×D×H) |
Machine power: | Servo motor drive |
Machine weight: | About 55kg |
Using electricity: | 1PH, AC220V, 50/60Hz, 10A or specified |
Standard configuration: | Fixture 1 set |