Purpose:

The YL-D1813Z5 triaxial tensile testing machine is mainly used to test products with large surface areas, such as LCD displays, automotive components, solar photovoltaic panels, and so on. It is a basic equipment for quality control, incoming inspection, physical property testing, mechanical research, and material development that can test materials for tensile, compressive, bending, shear, adhesive, peel, tear, and other tests.

Software functions:

Can conduct tensile, compressive, bending, shear, tear, and peel tests. Using a PC and interface board for data collection, storage, processing, and printing of test results. Can calculate parameters such as maximum force, yield force, average peel force, maximum deformation, yield point, elastic modulus, etc; Capable of curve processing, multi-sensor support, graphical interface, flexible data processing, and MS-ACCESS database support, making the system more powerful.

Machine features:

It can achieve X, Y, Z three-axis mobile tension and pressure measurement, and can measure different parts of large workpieces without moving the product.

Technical parameters:

Capacity selection: 10N, 20N, 50N, 100N, 200N, 500N, 1KN (customizable)

Monitor: Computer display mode

Number of motion axes: Three axes (X, Y, X)

Power resolution: 1/500,000

Strength accuracy: 0.5%

Travel resolution: 1/500,000

Control mode: Full computer operation mode

Machine size: approximately 2820x2160x2300mm (width, depth, height)

Power supply information: 220V.

Equipment Performance Description:

1. X and Y axis movement speed: 0.01~500 mm/min

2. Z-axis movement speed: 0.01~800 mm/min

3. Electric cylinder: ball screw, speed 0.01-500 mm/min

4. Control three sets of servo motors (X/Y/Z axes)

5. Must meet the operational requirements of a 75 inch panel.

Equipment appearance and structural design:

1. Base platform: T-shaped groove processing (only four sides need to be slotted, the rest of the plane remains intact).

2. The bottom platform must have surface anodizing treatment to prevent oxidation.

3. Base size: 2000 * 1500 mm

4. Testing space: 1800 * 1300 * 500 mm

5. X-axis 1800mm, linear bearing ball screw and its structure

6. Y-axis 1300mm, linear bearing ball screw and its structure

7. Z-axis 500mm, linear bearing ball screw and its structure

8. Static weight loading mechanism (fixture): can load weights below 10kg, with Z-axis displacement

9. Can be used for tensile testing/pressure testing/fatigue testing

System accuracy:

1. X/Y-axis ball screw C8 grade, accuracy: 20u/300mm

2. Z-axis ball screw C8 grade, double nut, accuracy: 20u/300mm

3. Electric cylinder: ball screw, accuracy: 20u/100mm

4. Three force sensors: 20kg/50kg/100kg

a. Degree level: Level 1 (0.5)

b. Structural form: S Type、 Regardless of direction

c. Nonlinear: 0.02% of R.O

d. Zero point balance: 1% of R.O

e. Rated capacity creep: 0.03% of R.O. (20 min)

f. Temperature effect of output: 0.005%/℃ of applied force

g. Temperature effect at zero point: 0.005%/℃ of rated output

Protection and safety devices:

1. Security mechanism with testing capability

2. Equipped with system protection devices

3. At the beginning and during the testing process, there is a light warning alarm device (which can be manually turned off)

4. Safety overload protection: 1.5 times the rated capacity

When pressed down, it will automatically stop when it exceeds the rated value.

Signal extraction and analysis system:

1. Controller (I5/8G/500G/DVD-R/24inch/keyboard, mouse/Windows+office/branded machine) (user provided)

2. Control three sets of servo motors

a. Two sets of horizontal positioning (can display the position and reset the origin, and can set more than 100 test points in advance).

b. 1 set of vertical testing (for repeated compression tests, the number of tests can be set to 999 or more in advance).

3. Cooperate with computer software to control the machine and display data

4. Resolution: The entire machine is analyzed without segmentation, with a resolution of ± 1/300000 and a maximum resolution of ± 1/10 million;

5. Sampling frequency: 1000 Hz; Maximum 20k Hz

6. A/D conversion: 24 bits

7. Transmission speed: 1000 Hz; Maximum 20k Hz

8. Force sensor interface: 1 set (4 channels)

9. Testing software: One set of standard static load testing machine software (with functions such as real-time load, displacement, graphical display, and point calculation of average values; setting of phase dynamic positions for each testing point).

10. Language used: Chinese (Simplified/Traditional)/English.

Fixture tools:

1. Fixture: 1 set, suitable for ACF peel strength testing fixture (standard equipment).

2. Fixture: Fix the panel crossbar.

3. Paired with weights, 1kg, 2kg, 3kg, 4kg, 5kg, can be placed on the static weight loading mechanism.

4. Data storage and recording machine (I5/8G/500G/24 inches/keyboard, mouse/Windows+office/branded machine). (User provided)