XU-B series oil suction filterIt is usually installed at the oil pump suction port to protect the oil pump and other hydraulic components, avoid inhaling pollutants and impurities, effectively control hydraulic system pollution, and adjust the cleanliness of the hydraulic system. The XU-B series oil suction filter is equipped with self sealing valve, bypass valve, filter element pollution blockage transmitter and other devices, so that the oil in the tank will not flow out when replacing or cleaning the filter element. However, in order to avoid the phenomenon of cavitation in the pump, full attention must be paid to pressure loss, usually using 100-200 mesh coarse metal mesh or recessed metal wire materials. Therefore, it is not a filter that controls the concentration of pollutants in the system.

The core part of the oil filter is the filter element, which consists of a filter frame and stainless steel wire mesh. The stainless steel wire mesh is a vulnerable component and requires special protection;

2. After the filter has been working for a period of time, a certain amount of impurities settle in the filter core. At this time, the pressure drop increases and the flow rate decreases. It is necessary to remove the impurities in the filter core in a timely manner;

3. When cleaning impurities, special attention should be paid to the stainless steel wire mesh on the filter element not being deformed or damaged. Otherwise, if the filter is installed again, the purity of the filtered medium will not meet the design requirements, and equipment such as compressors, pumps, and instruments will be damaged;

If the stainless steel wire mesh is found to be deformed or damaged, it needs to be replaced immediately.

Model: XU-B

Nominal flow rate: 16-1000L/min

Filtering accuracy: 80-180 μ m

Nominal pressure: 1.6Mpa

Nominal diameter: 20-75mm

Connection method: thread, flange

1. Metallurgy: Used for filtering hydraulic systems of rolling mills and continuous casting machines, as well as filtering various lubrication equipment.

2. Textile: Purification and uniform filtration of polyester melt during wire drawing process, protective filtration of air compressor, and removal of oil and water from compressed gas.

3. Thermal power and nuclear power: Purification of oil for lubrication systems, speed control systems, bypass control systems of gas turbines and boilers, purification of feed pumps, fans, and dust removal systems.

4. Mechanical processing equipment: lubrication systems and compressed air purification for paper making machinery, mining machinery, injection molding machines, and large precision machinery, dust recovery and filtration for tobacco processing equipment and spraying equipment.