The powder compaction density tester meets the requirementsISO、GBMultiple standards, in compliance with the requirements of the United States Pharmacopeia, with simplified operation, adjustable vibration frequency, and the ability to hold three volumes of graduated cylinders. The whole machine has low power consumption and stable and reliable long-term operation.

The tap density or bulk density (referred to as loose packing density in some industrial fields) is defined as the mass of a sample divided by its volume, which includes the volume of the sample itself and its pores and gaps. Bulk density is necessary for characterizing catalysts, foam materials, insulation materials, ceramics, powder metallurgy, and other industrial products

Widely used in various metal powders and other rare metal powders, alloy powders or metal oxide powders, as well as various non-metallic powders; Other powders: such as soil, dyes, pharmaceuticals, pesticides, abrasives, coatings, food additives, catalysts, cement, river sediment, etc., for powder compaction density testing.

conform toASTM B527、D4164、D4781、IDF 134、ISO 787-11、3953、8460、8967、9161、JIS K5101-12-2、Z 2512、 GB/T5211.4、MPIF 46、USPPart II、BSIB527、GB/T 21354、5162、14853、

GB/T 5162-2006/ISO3953:1993GB/T 5162-2006/ISO3953:1993Various indicators in

The powder density tester consists of components such as a variable speed motor, vibration components, microcomputer, and micro printer. And the instrument has the characteristics of compact structure, firmness, and simple operation.

Technical principle data:

The graduated cylinder containing powder or particles is fixed on the mechanical vibration device, and the vibration motor drives the mechanical vibration device to vibrate vertically up and down. The graduated cylinder containing powder or particles vibrates rhythmically with the mechanical vibration device. As the number of vibrations increases, the powder or particles in the graduated cylinder gradually compact. After reaching the set number of vibrations, the mechanical vibration device stops vibrating and reads out the volume of the graduated cylinder. According to the definition of density: mass divided by volume, the density of the compacted powder or particles can be calculated

Technical parameters:

Amplitude:1 –30mm/Adjustable

Vibration number:15 -280TAP/min

Adjustable0 Counter: 9999–

Automatic power-off setting for secondary dialingVibration mode:ContinuegiveCounter

Mode selectablepower supply

AC 110/220 50/60Hz

Counting detectionPhotoelectric inductionApplicable measuring cylinder

mL 25 50

The measuring cylinder is a standard productOperation steps:There are two vibration modes for the vibration density tester:Continuemode(Keep vibrating until the power is turned off)perhapsCountermode(The vibration stops when it reaches the set number of times

)

Please select before operating.Continue mode operation method:1. Turn the speed adjustment knob of the machine to

O

Connect the device to the control box and plug it into the designated power source after positioning.

2. Adjust the height gauge to the predetermined filling height. Simply loosen the height adjustment button and rotate the filling base to lock the adjustment button with a tool.3. Place the filling material into the graduated cylinder and secure it with a fixing ring.4. Select vibration mode

continue

.

5. Turn on the power button, rotate the speed control knob to the appropriate speed, and press the start button to start the machine.

6. At this point, the machine will continue to vibrate until the power is turned off.Counter mode operation mode:1. Turn the speed adjustment knob of the machine to

O

Connect the local machine to the counting control box and plug it into the designated power supply after positioning.

2. Adjust the height gauge to the predetermined filling height. Simply loosen the height adjustment button and rotate the filling base to lock the adjustment button with a tool.3. Place the filling material into the graduated cylinder and secure it with a fixing ring.4. Select vibration mode

Counter.4. Set the vibration frequency of the counting key(0-999order

)