We use imported high-quality tool steel and specially designed cutting tools, which are particularly durable. The tool installation design is adjustable and can be worn multiple times after blunt use, with a long service life. The moving blade holder is designed as a stepped shear type equipment, which decomposes the force on the chips and causes the chip force to increase exponentially. The material of the moving knife holder is T7 high-quality steel material, with reasonable rigidity and flexibility, not easily broken or worn. It is fastened with high-strength (8.8) steel screws, and the structure is solid and durable. The main body of the machine is made of high-quality structural materials, and long-term use will not affect the mechanical performance due to broken materials. The axis of the main body of the machine is also processed with high-precision coordinates in sequence with the double end faces to ensure concentricity and perpendicularity. Each component is set with a reference hole, and the surface is processed with rough and fine two-stage flow machining technology, with strong interchangeability and high precision. Assemble heavy-duty bearings and install double-layer sealing devices in the crushing chamber. The moving blade seat and spindle are assembled by heat sealing, with advanced technology. The clearance between the moving blade and the bearing seat is less than 0.05mm, preventing the leakage of crushed powder into the bearing seat and increasing the motor load, overcoming the key fault factors of the crusher.

Product Introduction:

1. Suitable for crushing ordinary sheets, pipes, profiles, plates, and packaging materials, as well as plastic products such as injection molding machine nozzles and corners, and pouring ports;

2. Using imported high-quality tool steel and specially designed cutting tools, it is durable and long-lasting. The installation design of the cutting tool is adjustable and can be worn multiple times after blunt use, with a long service life.

3. The moving blade holder is designed as a stepped shear type equipment, which decomposes the force on the cutting layer, causing the chip force to increase exponentially and the product to be uniformly granulated. The material for the moving knife seat is made of high-quality steel, with reasonable rigidity and flexibility, and is not easily broken or worn,

4. The front and rear of the room are double layered soundproof, with soundproof materials filling the middle, resulting in low noise. The overload protection device of the motor device is interlocked with the power supply protection system to ensure safety.