VIP member
Weiyasi Chemical Raw Material Drying Equipment
Chemical raw material drying equipment is a new type of equipment specifically designed for drying chemical products, which is improved from microwave
Product details
Chemical raw material drying equipmentIt is adoptedMicrowave drying equipmentA new type of equipment specifically designed for drying chemical products, which has been improved.Drying equipment for chemical productsCompared with drying equipment used in industries such as food, pharmaceuticals, biological products, pharmaceuticals, wood, paper, tea, etc., the main consideration is the corrosion of the product on the equipment. Therefore, acid and alkali resistant stainless steel materials should be used in terms of materials, which can quickly dry products with a moisture content of 30% to below 1%. The drying temperature is low, the efficiency is high, the drying temperature and speed are adjustable and controllable, and the drying quality can be well controlled. This drying equipment is a conveyor belt dryer, which is a new generation belt dryer developed and produced by our factory based on years of practical experience and advanced technology of similar products at home and abroad.
The main characteristics of a chemical raw material dryer are: low equipment investment, small footprint, using electricity as energy source, no need for boilers, no pollution, and easy to use. The system has high thermal efficiency and low energy consumption. The product has low and stable moisture content, and high product quality. Continuous operation results in low labor intensity for workers.
Chemical raw material drying equipmentParameters:
1. Equipment working power supply: three-phase five wire 380V ± 10%
2. Microwave operating frequency: 2450MHz ± 50MHz
3. Microwave power: 300KW (adjustable)
4. Dehydration rate: 300 kg/hour
5. Drying temperature: 80-120 degrees (adjustable and controllable)
6. Height of inlet and outlet: 60mm
7. Belt width: 1250mm
8. Transmission speed: 0-5 m/min (variable frequency speed regulation)
9. Microwave leakage: National standard ≤ 5mw/c ㎡
10. Dimensions (length x width x height): Approximately 33550 x 2060 x 1750mm
11. Execution standard: Complies with the domestic GB5226 electrical standard
Due to the non-standard nature of the device, the above parameters are for reference only. Please feel free to contact us by phone or visit our company directly for inspection and cooperation.
The main characteristics of a chemical raw material dryer are: low equipment investment, small footprint, using electricity as energy source, no need for boilers, no pollution, and easy to use. The system has high thermal efficiency and low energy consumption. The product has low and stable moisture content, and high product quality. Continuous operation results in low labor intensity for workers.
Chemical raw material drying equipmentParameters:
1. Equipment working power supply: three-phase five wire 380V ± 10%
2. Microwave operating frequency: 2450MHz ± 50MHz
3. Microwave power: 300KW (adjustable)
4. Dehydration rate: 300 kg/hour
5. Drying temperature: 80-120 degrees (adjustable and controllable)
6. Height of inlet and outlet: 60mm
7. Belt width: 1250mm
8. Transmission speed: 0-5 m/min (variable frequency speed regulation)
9. Microwave leakage: National standard ≤ 5mw/c ㎡
10. Dimensions (length x width x height): Approximately 33550 x 2060 x 1750mm
11. Execution standard: Complies with the domestic GB5226 electrical standard
Due to the non-standard nature of the device, the above parameters are for reference only. Please feel free to contact us by phone or visit our company directly for inspection and cooperation.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-