model

number

type

component

CS-10

125320

elasticity

Rubber, abrasives

CS-10F

125321

elasticity

Rubber, abrasives

CS-17

125322

elasticity

Rubber, abrasives

H-10

125323

Inelastic

ceramics

H-18

125324

Inelastic

ceramics

H-22

125325

Inelastic

ceramics

H-38

125326

Inelastic

ceramics

CS-0
S-32

125344
125344

elasticity

Non abrasive rubber

S-42
S-33

125564
121124

elasticity

sand paper strip

CS-5

125319

elasticity

Wool blanket

S-35

125345

Inelastic

tungsten carbide

S-39

125529

leather

200 type diamond
Calbrase grinding wheel dresser

Used for precise adjustment of Calibrade grinding wheels. To ensure the diameter size *, the grinding wheels are always adjusted in pairs.
The diamond cutting head is installed on an adjustable position gripper and placed on a shielded guide block, which can move tangentially due to the manual crank and feed thread. A vacuum cleaner is used to remove abrasive particles.

S-31

NEMA standard glass panel, 4 'square, aperture 1/4', thickness 1/8 'flat glass, 10 pieces.

S-32

NEMA grinding wheel (same as CS-0), one pair.

S-33

100 pieces of sanding paper with adhesive backing, adhered to the circumference of S-32 (CS-0), can be used as a Calibrase grinding wheel, complying with EN, ISO, DIN standards.

S-34

NEMA standard board, 0.032 ', zinc, 1/4' hole, 5 pieces.

S-36

50 sample gaskets, 4 1/4 'square, with pressure-sensitive adhesive used to adhere the samples. Flexible test samples are placed on top and pressed by grinding wheels. The gaskets are printed in the format of a record sheet.

S-36-1

50 circular sample gaskets

S-37

100 sample gaskets, 41/4 'square, with adhesive on both sides.

S-37-1

100 circular sample gaskets.

S-38

Standard gasket, 4 'square, 1/8' thick, 1/4 'hole, organic glass, 10 sheets, used for calibrating 155 type.

S-40

The 155 type sand can only be used after filtering through the American standard # 80 sieve first.

S-41

Container, capable of holding 50 pounds of # 240 alumina particles, for Type 155.

S-42

100 pieces of sandpaper strips with adhesive backing, adhered to the circumference of S-32 (CS-0), in compliance with NEMA testing standards.

503-0022

500g friction head, one pair

503-0023

1000g friction head, one pair

ST-11

A piece of grinding stone with a diameter of 4 ', a thickness of 1/2', and a hole diameter of 5/8 ', used for wheel shaped natural or synthetic rubber. The two ends of the grinding stone are rough on one side and smooth on the other, used for refreshing CS-10F

S-12

Brush for cleaning sample tray

S-16

Sample tray, 20 grams, steel, 4 'square, 1/4' hole, 10 pieces.

S-11

Sandpaper, grit 150, elastic wheel trimmed paper, diameter 4 ', 100 pieces.