1、 Installation method/steps for built-in water tank self-cleaning sterilizer

1. Install the energy controller in a dry and ventilated area with rain and waterproof measures.

2. Connect the control cable to the energy controller

3. Make the water level exceed the energy release circulation ring, and connect the 220V main power supply at the designated time to start the self-cleaning and disinfecting device of the water tank

4. When cleaning and maintaining water tanks and pools, first cut off the main power supply of the equipment, and then continue to turn on the power according to the specified time when using it

2、 Installation method of external water tank self-cleaning and disinfecting device: The external water tank self-cleaning and disinfecting device is placed outside the water tank, and the centerline of the circulating processor water pump is ensured to be lower than the minimum working water level of the water tank. Connect the inlet and outlet pipes of this product.

1. The installation location of the self-cleaning and disinfecting device for the water tank should be dry, ventilated, and equipped with rainproof and waterproof measures.

2. Raise the water level above the centerline of the energy release cycle water pump and connect the 220V main power supply to start the equipment.

3. When cleaning and maintaining water tanks and pools, first cut off the main power supply of the equipment. Still turn on the power according to the specified time when reusing.