WX1151/3351GP pressure transmitter-Fornitore globale

Product Groups

Firm Information

Transaction Level

VIP member
Contact
Phone

13852268678
Address

Gong'er Road, Jinhu Industrial Park, Jiangsu Province

Contact Now

WX1151/3351GP pressure transmitter

The WX1151/3351GP pressure transmitter is used to measure the liquid level, density, and pressure of liquids, gases, or vapors, and then convert them

Contact Supplier

More Products

Product details

WX1151/3351GP typepressure transmitterUsed to measure the liquid level, density, and pressure of liquids, gases, or vapors, and then convert them into4～20mA DCSignal output. WX1151/3351GPIntelligent pressure transmitters can be used withHARTThe handheld devices communicate with each other to set, monitor, or form an on-site monitoring system with the upper computer.
WX1151/3351GPOn site adjustment typeIntelligent pressure transmitterThis is a new product developed by our company based on on-site requirements. It can be operated without a manual controller and can be adjusted and configured on-site through button pressing.
1. Performance specifications
(Zero benchmark verification range, under reference conditions, filled with silicone oil,316 LStainless steel isolation membrane. ）

1.1. Reference accuracy
1.1.1. Digital and intelligent: ± 0.1% calibration range
1.1.2. Simulation, linear: ± 0.2% calibration range
1.2. stability
1.2.1. Digital and intelligent: 6 months, ± 0.1% URL
1.2.2. Simulation, linear: 6 months, ± 0.2% URL
1.3. Environmental temperature impact
1.3.1. Numbers and Intelligence:
Zero point error: ± 0.2% URL/56 ℃
Overall error: ± (0.2% URL+0.18% calibration range)/56 ℃
1.3.2. Simulation, Linear
Zero point error: ± 0.5% URL/56 ℃
Overall error: ± (0.5% URL+0.5% calibration range)/56 ℃
1.4. vibration effect
In any axial direction, the vibration effect at 200Hz is ± 0.05% URL/g
1.5. Power supply impact
Less than ± 0.005% output range/volt.
1.6. Load impact:
There is no load impact unless there is a change in the power supply voltage.
1.7. Electromagnetic interference/radio frequency interference (EMI/RFI impact)
When the field strength reaches 30V/M from 20 to 1000MHz, the output drift is less than ± 0.1% of the range.

1.8. Installation location impact
The zero drift is at most ± 0.25kPa. All zero drift
All can be corrected; Has no impact on the measurement range.
2. Functional specifications
2.1. Measurement range: 0-0.125-41370KPa
2.2. Zero point and range
2.2.1. Digital and intelligent
It can be adjusted using the local range and zero buttons, or remotely using a HART controller
2.2.2. Simulation, linear
Range and zero point continuously adjustable
2.3. Zero point positive and negative transfer
When zero point negative shift occurs, the lower limit of the range must be greater than or equal to - URL; When zero point is shifted forward, the upper limit of the range must be less than or equal to+URL. The verification range must be greater than or equal to the minimum range.
2.4. output
Digital and intelligent:
4～20mA DC， Users can choose linear or square root output. The digital process variables are superimposed on a 4-20mA signal and can be used by upper level computers using the HART protocol
Simulation, linear:
4～20mA DC, Linear with process pressure.

◆pressure transmitterSelection method

WX1151/3351GP	pressure transmitter
	code	Range of measurementKPa
	2	0-0.125～1.5
	3	0-1.3～7.5
	4	0-6.2～37.4
	5	0-31.1～186.8
	6	0-117～690
	7	0-345～2068
	8	0-1170～6890
	9	0-3450～20680
	0	0-6890～41370
		code	output
		E	4-20mA
		S	intelligent
			code	Structural materials
				Flanges and fittings		exhaust/Drain valve	Isolation Diaphragm	Fill with liquid
			22	316stainless steel		316stainless steel	316stainless steel	silicone oil
			23	316stainless steel		316stainless steel	Hastelloy alloyC
			24	316stainless steel		316stainless steel	Monel
			25	316stainless steel		316stainless steel	tantalum
			33	Hastelloy alloyC		Hastelloy alloyC	Hastelloy alloyC
			35	Hastelloy alloyC		Hastelloy alloyC	tantalum
			44	Monel		Monel	Monel
				code	option
				M1	0-100%Linear indicator table
				M2	LED display table
				M3	LCD display table
				B1	Pipe bending bracket
				B2	Board mounted bending bracket
				B3	Pipe mounted flat bracket
				D1	The side relief valve is located at the upper part of the pressure chamber
				D2	The side relief valve is located at the lower part of the pressure chamber
				No note	1/2NPTCone pipe threaded joint
				C2	T-shaped threaded jointM20×1.5, with rear weldingФ14Spherical cone connector of pressure pipe
				d	Explosion proof typedⅡBT4
				i	Intrinsically safe typeiaⅡCT6

The pressure transmitter series products include: capacitive pressure transmitter; Diffuse silicon pressure transmitter; Stainless steel pressure transmitter; Ceramic pressure transmitters, etc.

Online inquiry

Contacts
Company
Telephone
Email
WeChat
Verification Code
Message Content