Product Usage:

This product is widely used in industries such as chemical, petroleum, pharmaceutical, mining, papermaking, cement, steelmaking, power generation, coal processing, as well as urban sewage treatment plant water supply and drainage systems, municipal engineering, construction sites, etc. It can also be used to pump clean water and corrosive media.

Product usage conditions:

1Rated voltage of motor380V, can also be used200～660V、3KV、6KV、10KVWait, frequency50Hzperhaps60HzThree phase AC power supply;

2The temperature of the conveying medium shall not exceed40℃, depth not exceeding20m，PHThe value is4～10The density is less than1150kg/m3The solid phase volume ratio is5%Within.

Product Structure Features:

1Adopting advanced technologyAnsys-CFXThe software has optimized the design of hydraulic components, improving the hydraulic performance of the pump and achieving advanced pump efficiency.

2Adopting advanced technologyAnsysThe software has scientifically calculated and analyzed the pump structure, improving the service life of bearings and mechanical seals, and reducing the vibration and noise of the pump.

3、WQHThe pump is driven by a submersible motor, which can operate in both submersible and dry conditions. It is equipped with a self circulating cooling system to ensure the normal operation of the pump.

4For pumps with high fiber content in the pumping medium, a cutting and tearing device is installed at the inlet to ensure that the pump is not blocked or jammed during operation in media containing fibers and solid particles, causing rapid vibration.

5The cable outlet adopts a special structure, which eliminates accidental factors such as water leakage, electric leakage, short circuit, and stator coil burnout caused by human pulling, cable jacket breakage, cable aging, etc., effectively reducing the probability of water ingress and failure in the upper part of the whole machine.

6Considering the possible situations that may occur during the start-up and operation of the pump, multiple warning sensors are built-in, including leakage in the wiring room, motor chamber, and oil chamber, as well as temperature rise in the upper and lower bearings and motor coils. There are protections such as phase loss, short circuit, overcurrent, and water level control in the external control cabinet.

7The product adopts a patented structure and uses three sets of mechanical seals inside the pump, which increases the accumulation of trace amounts of water from normal leakage in the buffer chamber and lower shaft seal. Under the multiple protections of three high-quality mechanical seals and the large capacity aggregation effect of the buffer chamber, the reliability of the seal is increased, ensuring the reliable operation of the product.

8The secondary impeller structure is used to balance the external pressure of the mechanical seal, prevent water from entering the oil chamber, and thus extend the service life of the electric pump.