VIP member
WP-9000 Series Passive DC Signal Converter
The WP-9000 series passive DC signal converter isolates and transmits DC current signals. No additional power supply is required during use. In practi
Product details
The WP-9000 series passive DC signal converter isolates and transmits DC current signals. No additional power supply is required during use. In practical applications, it can effectively solve the problems that may occur in signal interconnection, while effectively suppressing possible interference during signal transmission.
This converter does not require external power supply, and there is electromagnetic isolation between the input circuit and the output circuit.
◆ Characteristics
Input DC current signals (4-20) mA from various devices.
● (4-20) mA current signal output.
1:1 equivalent isolation transmission.
● Input circuit overcurrent protection.
● Plug and unplug terminal block, DIN rail card installation.
● Working power supply
No need for additional auxiliary power supply
● Input signal
Current input: (4-20) mA
Equivalent input impedance: 100 Ω+load resistance (when input is 20mA)
Voltage drop: ≤ 2V (20mA)
Overload current: ≤ 35mA
● Output signal
Output current: (4-20) mA
Allowable load resistance: 0-350 Ω
Ripple (Vp-p): ＜ 10mV
● Performance indicators
Standard accuracy: ± 0.5% FS (when the load is 100 Ω)
*Note: The smaller the load, the higher the accuracy. For every 100 Ω increase in load, the accuracy decreases by 0.1%
Temperature drift: ± 0.015%/℃
Response time: ≤ 1s (10 → 90)%
Stability time: ≤ 3s
Impact of power supply voltage variation: ± 0.1% (allowable voltage range)
Influence of load resistance change: ± 0.1%/250 Ω
Channel isolation: isolation between input output power supply
Insulation resistance: ≥ 100M Ω/500VDC (AC)
Isolation capability: 1500VAC/1 minute 50Hz
Electromagnetic compatibility: Complies with relevant electromagnetic standards of IEC 61000
● Environmental parameters
Working temperature: (-20~+60) ℃
Storage temperature: (-40~+80) ℃
Environmental humidity: (5~+95)% RH (without condensation)
● Structure
Card mounted type; Modular watch core; ABS material casing; Plug in terminal
Whole machine weight: approximately 110g
◆ External dimensions
Dimensions: Width x Height x Depth=16 x 116 x 110 (mm)
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-