1. Function: sine wave, frequency modulation, sweep frequency, programmable, frequency doubling, logarithmic, amplitude modulation, maximum acceleration (20g), time control

2. The outer dimensions are approximately L * H * W: 1000 × 700 × 580mm (customizable)

3. Table size: 600 * 500 * 46 (customizable)

4. Vibration direction: vertical, horizontal,

5. Maximum test load: 60kg+10kg (customizable)

6. FM function: Any frequency within the frequency range can be adjusted

7. Sweep frequency function (0.01Hz): (up frequency/down frequency/time range) can be freely set to true standard back and forth sweep frequency

8. Programmable function (0.01Hz): 32 segments, each segment can be set arbitrarily (frequency/time), and can be cycled

9. Frequency doubling function (0.01Hz): 32 segments increase by multiples ① from low to high frequency ② from high to low frequency ③ from low to high and then to low frequency/recyclable

10. Logarithmic function (0.01Hz): ① Down to up frequency ② Up to down frequency ③ Down to up and then down frequency --3 modes logarithmic/cyclic

11. Vibration machine power (KW): 2.5

12. Amplitude (adjustable range of MMP-P): 0-5.0mm

13. Vibration waveform: sine wave

14. Time control: Any time can be set (up to 99.99 in hours, minutes, and seconds)

15. Power supply voltage (V): 220 ± 10%

16. Precision: The frequency can be displayed up to 0.01Hz, with a precision of 0.1Hz

17. Vibration frequency: 1-600HZ can be set

18. This control system can also perform fixed frequency without software control Sweep frequency operation.