The horizontal double suction pump uses prototype impellers and modified impellers and their cutting, with a full and wide profile and high efficiency. Within the performance range of the profile, it can provide a water pump with any flow head working point that appropriately meets the needs of users. The horizontal double suction pump adopts the most excellent hydraulic model at home and abroad that can self balance axial and radial forces. It has stable performance, high efficiency, compact structure, low vibration, high pump body pressure resistance, and easy installation and maintenance. All products are designed and optimized using computers. The company has strong technical strength, rich production experience, and comprehensive testing methods to ensure stable and reliable product quality.

The horizontal double suction pump adopts packing seal or mechanical seal according to the conveying medium or user requirements, and is not limited by the direction of rotation. For packing seals, there is sufficient space for replacing the packing.

1. The allowable working pressure is 2.5 MPa; The pump inlet pressure+pump head is ≤ 2.5 MPa. According to the maximum pressure that the pump casing can withstand, the materials of the pump body and pump cover are gray cast iron (1.6 MPa), ductile iron (2.0 MPa), and cast steel (2.5 MPa). Please indicate the pressure condition or material of the pump when placing an order.

2. Medium: Water with a temperature ≤ 105 ℃ or other liquids with physical and chemical properties similar to water (solid particles ≤ 80 mg/L).

Using bearings

1. Sealed rolling bearings lubricated with grease are easy to maintain and have a long operating time.

2. Equipped with a constant oil level oil cup, it can also be lubricated with thin oil.

3. Imported (SKF, NSK, NTN) high-quality bearings are selected for smooth operation, low noise, and long service life.

The horizontal double suction pump has a compact structure and good stability. This type of pump has a split structure with the pump casing, and both the inlet and outlet are located on the pump body. During maintenance, only the pump cover needs to be lifted out, and the rotor components can be removed for maintenance without disassembling the pipeline, which is very convenient.

The electric motor (driver) can be installed on the left or right end as needed, making it convenient for on-site installation. Structurally shortening the axial dimensions of rotor components results in better shaft rigidity and more stable and reliable operation. There is a pump body sealing ring, and the impeller sealing ring is an optional component. The sealing ring can be replaced after wear, reducing operation and maintenance costs.