VIP member
Product details
DESCRIPTION
Vector VS330 adopts Eclipse Vector patented technology from Hemisphere GPS company, and the optimized Eclipse Vector technology brings a series of new experiences to Vector VS330: undulating, pitch, roll output, and more powerful orientation and positioning performance;
The Vector VS330 receiver, with its own display and user interface, can be conveniently installed on terminal devices; Dual GPS antennas can be installed separately according to the user's directional accuracy requirements;
Vector VS330 GNSSKey advantages of the receiver
Excellent directional accuracy, including short baseline and antenna spacing up to 10 meters
U L1/L2 GPS/GLONASS RTK function
U supports L-band DGNSS/HP/XP (OmniSTAR) ®) technology
U Acceptable beacon
Fast RTK convergence and reacquisition time
Excellent carrier smoothing performance
5cm RTK effective value fluctuation accuracy
Powerful technology for suppressing multipath effects and interference
| GPSPerformance specifications | |
| Receiving type | Vector GNSS L1/L2 RTK |
| Acceptable signal | GPS, GLONASS, Galileo (requires update) |
| Number of channels | 270 |
| GPS sensitivity | – 142dBm |
| SBAS tracking | 3 channels, parallel tracking |
| Update rate | Standard 10Hz, 20Hz authorized |
| Horizontal Accuracy | RMS（67%）2DRMS（95%） |
| RTK | 10 mm + 1 ppm 20 mm + 2 ppm L-band DGNSS/HP/XP |
| SBAS (WAAS) | 0.25 m 0.50 m |
| single-point | 1.2 m 2.5 m |
| Orientation accuracy | <0.17 ° rms @ 0.5m antenna spacing <0.09 ° rms @ 1.0 m antenna distance <0.04 ° rms @ 2.0 m antenna spacing <0.02 ° rms @ 5.0 m antenna distance < 0.01˚ rms@10.0 M antenna distance |
| Fluctuation accuracy | 30cm (DGPS), 10cm (RTK) |
| Timing accuracy (1PPS) | 20 nanoseconds |
| Turning rate | Maximum up to 100 ° C/s |
| Compass safety distance | 30cm (with casing) |
| cold start | <40 seconds (no calendar or clock) |
| warm start | <20 seconds typical (with almanac or clock) |
| hot start | <5 seconds typical (with almanac, clock, and location) |
| course correction | <10 seconds typical (effective positioning) |
| maximum speed | 1850 kilometers per hour (999 nautical miles per hour) |
| Maximum altitude | 18288 meters (60000 feet) |
| Pitch/roll accuracy | < 1˚rms |
|
Beacon performance specifications | |
| Number of channels | 2 channels, parallel tracking |
| Frequency range | 283.5–325 kHz |
| operation mode | Manual, automatic, and database |
| agreement | IEC 61108-4 Beacon Standard |
| L-band DGNSS/HP/XPPerformance specifications | |
| sensitivity | – 130dBm |
| Channel Spacing | 7.5 kHz |
| Satellite selection | Manual and automatic |
| Re capture time | 15 seconds (typical) |
| suppression | 15 kHz spacing>30 dB, 300kHz spacing>60 dB |
| processor | DSP providing differential algorithm processing based on digital demodulation and protocol decoding modules |
| Command support | Obtain L-Band DGNSS/HP/XP (OmniSTAR) area, satellite information, allow input and query of L-Band DGNSS/HP/XP (OmniSTAR) authorization information, receive quality indication of error rate output, and manual frequency adjustment |
| communication | |
| serial port | 2 full duplex RS 232 ports, 1 full duplex RS 422 port |
| USB Port | 1 USB-A |
| Baud rate | 4800 – 115200 |
| Correct input/output protocol | RTCM v2.3 (DGPS), RTCM v3 (RTK), CMR, CMR+ |
| Data Input/Output Protocol | NMEA0183, Crescent Binary |
| Timing output | 1PPS CMOS, low power frequency, synchronous descent, 10 Ω, 10pF load |
| power supply | |
| INPUT VOLTAGE | 8–36 VDC |
| Power consumption | <6.2 W rated (GPS (L1/L2), GLONASS (L1/L2), and L-band DGNSS/HP/XP) <5.3 W rated (GPS (L1/L2) and GLONASS (L1/L2)) |
| electric current | <0.52 A rated (GPS (L1/L2), GLONASS (L1/L2), and L-band DGNSS/HP/XP) <0.44 A rated (GPS (L1/L2) and GLONASS (L1/L2)) |
| power isolation | 500 V |
| reverse polarity protection | correct |
| Antenna circuit protection | correct |
| Antenna input impedance | 50Ω |
| environment | |
| operation temperature | -30 ℃ to+70 ℃ (-22 ° F to+158 ° F) |
| storage temperature | -40 ℃ to+85 ℃ (-40 ° F to+185 ° F) |
| humidity | 95% non condensing (installed in the casing) |
| Shell grade | IP 66（IEC 60529） |
| shock and vibration | Mechanical impact: EP455Section 5.14.1 Homework (installing in a housing with screw holes) EP455 Vibration: Section 5.15.1 Random |
| EMC | CE (IEC 60945 Emissions and Immunity) FCC Part 15, Subpart B CISPR22 |
| physics | |
| size | 20.2 length x 12.0 width x 7.5 height (cm) |
| weight | 1.1 Kg |
| Status indicator (LED) | Power supply, first and second GPS locking, differential locking, DGPS positioning, heading, RTK locking, L-band DGNSS/HP/XP lock |
| Power switching | front panel |
| Power/data connector | 9-pin ODU metal circle |
| Power Connector | 2-pin ODU metal circle |
| Data Connector | DB 9 (sealed) |
| Antenna Connector | Double TNC (female head) |
| auxiliary equipment | |
| gyroscope | Provides smooth heading, fast directional reacquisition, and reliability<5 ° per minute. In the event of GPS signal loss, continuous directional time can last up to 3 minutes |
| Tilt Sensor | Provide pitch and roll data to assist in providing quick start-up and re capture in directional solutions |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-