product description
This chemical vacuum system is widely used in processes such as exhaust, evaporation, or gas extraction in chemical, biological, and pharmaceutical laboratories. The system can effectively meet the vacuum requirements of high boiling point solvents. Mainly used in conjunction with rotary evaporators or vacuum drying ovens and other instruments. Air inlet collection bottle（AK）Made of glass material and covered with a protective film, it can prevent particles or droplets from entering the pump. Exhaust gas condenser at the outlet（EK）High efficiency and compact structure. This condenser can achieve near100%The solvent recovery effect can effectively recycle solvents while actively protecting the environment.
Performance characteristics
· **Chemical corrosion resistance and steam resistance
· Has excellent performance even under high vacuum conditions
· The use of gas Town can still achieve a very good ultimate vacuum
· Quiet exhaust and extremely low vibration
· **The solvent recovery system makes it an environmentally friendly product
TECHNICAL INDEX |
unit |
MD 4C NT +AK+EK |
Number of pump heads/series |
|
4 / 3 |
50/60 HzThe maximum pumping speed below |
m3/h |
3.4 / 3.8 |
50/60 HzThe maximum pumping speed below |
cfm |
2.0 / 2.2 |
Extreme vacuum (absolute pressure) |
mbar/torr |
1.5 / 1.1 |
Extreme vacuum (absolute pressure), using gas ballast |
mbar/torr |
3 / 2.2 |
Environmental temperature range (operation) |
°C |
10 - 40 |
Environmental temperature range (storage) |
°C |
-10 - 60 |
*High outlet pressure (absolute pressure) |
bar |
1.1 |
Air inlet interface |
|
DN 10 mmHose nozzle connector |
Air outlet interface |
|
DN 10 mmHose nozzle connector |
coolant connection |
|
2individualDN 6-8 mmHose nozzle connector |
Rated motor power |
kW |
0.25 |
50/60 HzRated speed below |
min-1 |
1500/1800 |
protection grade |
|
IP 40 |
Size (length)xwidexHigh) |
mm |
326 x 243 x 402 |
weight |
kg |
17.3 |
The noise level is50Hertz, typical value |
dBA |
45 |
NRTLstandard |
|
Canada and the United States |
ATEX conformity (only 230V) |
|
II 3G IIC T3 X Internal Atm. only |
Product configuration |
|
The vacuum system is installed and connected for use, and comes with an instruction manual |
Optional Accessories |
|
Vacuum rubber tubeDN 10 mm (686002) |
ordering information
product name |
Working voltage and frequency |
plug |
order No |
MD 4C NT +AK+EK |
230 V~ 50-60 Hz |
CNChinese power plug |
736701 |
