Equipment Overview:

This device is a cleaning device used for oil removal and iron pin cleaning of NCS, NF steering knuckles and wheel supports. Equipped with ultrasonic cleaning device, circulating filtration device, spray system, high-pressure air knife cutting water system, hot air drying system, rust prevention system, automatic operation of track chain transmission device, and computer automatic control device. After being cleaned according to the prescribed procedure, the surface of the workpiece is free of stains and water marks.

Type:Stainless steel chain transportation;

Purpose:Cleaning/drying workpieces;

Cleaning cycle:The cleaning time is about 1 minute per 12 pieces, and customers can set the conveyor chain speed according to process requirements;

Conveyor speed:5-8m/min (continuously adjustable speed), stainless steel chain width 20-25mm;

Use cleaning agents:Environmentally friendly degreaser;

Cleaning method:Ultrasonic cleaning for oil and impurities removal;

Heating:Using stainless steel tube heating, with a heating power of 4.5KW × 4=18KW;

The ultrasonic generator:Advanced domestic sweep frequency circuit, using IGBT high-power amplifier tube, with power regulation, operating frequency indication and sweep frequency selection function; Strong ultrasound output

Powerful and stable in work.

Overflow:The solution in this tank overflows to the storage tank through the overflow port, facilitating the removal of oil stains suspended on the surface of the solution;