1、 Equipment Overview
Glue curing machineMainly used for UV drying after TP or other adhesive applications.
Adopting LED UV surface light source, it has low temperature, long lifespan, and saves energy consumption.
2、 Equipment specifications and main technical indicators
◆ Transmission network width: adjustable from 70-150mm (operating direction from left to right, fixed front track)
◆ Model structure: The feeding section is 200mm long, the UV section is 600mm long, and the discharging section is 200mm long,
The total length is 1000mm, the total width is 600mm, and the total height is 1400mm,
The distance between the conveyor network and the ground is 1000mm (adjustable within ± 20mm).
UV luminous area: can illuminate a width of 150mm.
◆ Wavelength: 365nm single band production
Radiation level: 500mw/cm ² (measured at a height of 15mm from the UV emitting surface of the product)
Material: The interior and exterior are made of SUS304 # smooth stainless steel plate
◆ Lamp lifespan: Voltage fluctuation within ± 5, LED light source warranty of 3 years and 20000 hours of use
(The earliest available time shall prevail).
◆ Illumination height: Adjustable from 5-35mm to the mesh belt.
◆Glue curing machineTransmission system: Japanese Dongfang Motor is paired with gear reducers and conveyor belts for transmission.
Conveying speed of 2M/min, VR stepless speed regulation, LED digital speed display.
The conveying direction is from left to right facing the machine control panel.
◆ Conveyor structure: black conductive polyurethane belt is used for conveying, with a belt width of 15mm,
The conveyor track is equipped with HIWIN screws and sliders for manual width adjustment, with a width range of 70-150mm
Control panel: Over temperature indicator light, power indicator light, start switch, stop switch, adjustable strong and weak light.
◆ Protection devices: residual current circuit breaker, transmission motor overload protection, abnormal emergency switch, light source over temperature protection
Control circuit fuses, etc., in compliance with international standards.
The temperature of the product after passing through the furnace shall not exceed 55 ℃.
2. Non metallic materials are made of anti-static materials that meet industry anti-static requirements,
The operating noise from one meter away from the equipment is ≤ 60dB.
◆ Operating environment: The ambient temperature is 10-30 ℃, and the relative humidity is 20-80RH.
Equipment cleanliness level: static level 100, dynamic level 10000.
Production cycle: (according to production process requirements)
Working size: W70-150mm × L1000mm × H30mm
Equipment size: approximately L1000mm * W600mm * H1400mm
Weight: Approximately 100kg
◆Glue curing machinePower supply: AC 220V single-phase 50Hz 2KW