UJZ-15 mortar mixerBelonging to measuring equipment, no one is allowed to dismantle it without the permission of our company.UJZ-15 mortar mixerIt is strictly prohibited for personnel who are not familiar with the user manual to operate, or only allowed to operate under supervision. Our company sells paint specific gravity cups, black and white grid covering force plates, format tubes, iron cobalt colorimeters, transparency testers, scraper fineness meters, coating viscosity meters, flat grinding machines, mixing and sanding dispersers, flat grinding machines, Stormer viscometers, coating cup protrusion testers, gloss meters, colorimeters, three bar grinders, T-bending machines, rotary viscometers, paint film impact testers, etc.

Related productsVertical mortar mixer

Introduction:
A specialized equipment designed to cooperate with the promotion and implementation of the "Basic Performance Test Method Standard for Construction Mortar" (JGJT-2009) issued by the Ministry of Construction of China. It is mainly used in the construction industry, colleges and universities, scientific research units, and quality inspection departments as a mixing machine for wall powder materials and mortar strength tests for brick walls. It is also suitable for the production of artificial marble fabrics and other powder mixing work by manufacturers.
It has two relative rotations, with the stirring blades moving clockwise and the stirring drum moving counterclockwise. Therefore, it has the characteristics of uniform stirring, short stirring time, high efficiency, and easy operation.

Parameters:
Mixing blade 2 layers 4 pieces x 45o.
The operating diameter of the mixing blade is Φ 200mm.
The stirring blade speed (clockwise) is 80 ± 4r/min.
The speed of the mixing drum (counterclockwise) is 60 ± 2r/min.
The mixing drum has a capacity of 28L.
The rated capacity (discharge) of the mixing drum is 15L.
The inner diameter of the mixing drum is 380mm.
The depth of the mixing drum is 250mm.
The gap between the fixed blade and the mixing drum wall is 2 ± 0.5mm.
The distance between the mixing blade and the bottom of the mixing drum is 2 ± 0.5mm.

Operation and usage:
Firstly, lower the gearbox and press the controller switch to operate it in idle mode, checking if the steering direction is consistent with the stated direction. After parking, check whether the clearance between the scraper and the wall and bottom of the mixing drum is correct. After adjustment, tighten the nut of the mixing blade and put the prepared material into the drum according to the proportion. Start the mixing machine, then slowly pour an appropriate amount of water into the drum. After mixing the material evenly, stop the machine and turn the box flipping mechanism to tilt the drum at an angle. Take out the material for later use. After each mixing and discharging, make sure to check whether the position of the drum bottom and base is correct when resetting the mixing drum. Otherwise, do not start the machine.

Structure and principle:
This equipment consists of a casing, motor, worm gear box, gearbox, blades, scraper, cylinder, worm frame, and programmable controller.
The transmission type of this machine is a motor connected to a worm gear box, which drives the worm gear. The upper end of the worm gear shaft drives the mixing drum to rotate counterclockwise through a clutch, and the output gear at the lower end of the worm gear shaft engages with the gear at the lower end of the column. The driving gear of the upper gear box is transmitted through the coupling on the vertical shaft, and the mixing gear drives the mixing blades to rotate clockwise through the intermediate gear transmission. The specific transmission program is: the mixing drum speed is 1452 × 2/48=60.42r/min.

Maintenance and upkeep:
This book should be placed in a dry and non corrosive environment.
After use, be sure to clean the inside of the drum and mixing blades with clean water and wipe them dry. (Long term non users can apply rust proof oil on the same interior and blade surface)
Regularly pay attention to whether the fasteners are loose after use and tighten them in a timely manner.
It is strictly prohibited to insert hard objects such as iron nails and wires into cement and sand during feeding to avoid damaging the machinery.
After using the gearbox for a period of time, it is necessary to check the level of its lubricating oil and promptly replenish the mechanical oil with a quality of 30 # that can be seen through the observation hole.

Structural features:
The machine is a horizontal cylinder with a unique structure of inner and outer double-layer spiral belts. It runs smoothly, has reliable quality, low noise, long service life, easy installation and maintenance, and has multiple agitator structures. It is a versatile mixing equipment with a wide range of applications.
The mixing speed is fast and the mixing uniformity is high, especially for viscosity. A scraper can be installed on the spiral belt, which is more suitable for thick and paste like mixing.
Under the mixing requirements of different materials (special materials must be cleaned after each mixing), different spiral belt structures and heating and drying jacket types are used.
Special atomized liquid, equipped with special nozzles.
The horizontal body can also be equipped with movable doors for users to clean.