Overview: This box adopts a connected structure, with two hot air circulation ovens (electric heating) on the left and right, using horizontal air supply. Both boxes are equipped with independent circulation fans and work completely independently. Two eye sockets are left on the left and right sides of the box outside5Each socket has two two two eye sockets,There are live test line holes on both sides of the box, and the outer shell of the box is made of cold-rolled plate, surface phosphating treatment, and sprayed with silver gray environmentally friendly hammer paint. Each box can be placed inside5Layered mesh board.

Inner container size（mm）(High)1300mm*wide1150mm*deep1000mm）

*2Power：

15KW*2

Temperature parameters:Temperature range:RT(room temperature)-100

℃ (arbitrary adjustment setting)Temperature uniformity:±3

℃ (constant temperature state test)100Heating rate: from room temperature to15℃ less than

minute

Structure and Materials:

Shell material: high-quality cold-rolled plate, surface phosphating treatment, and sprayed with silver gray environmentally friendly hammer pattern paint

Inner liner material: high-quality stainless steel brushed plate partitionPlate: The oven is divided into two independent baking areas on the left and right, each with five stainless steel mesh plates, horizontally divided into two rows, and each layer is load-bearing

20Kg90Insulation material: thickness

Millimeter high temperature resistant aluminum silicate fiber insulation cotton with good insulation performance

Door structure: number

Quantity: Double doors (two in total) thick90Degree:

Millimeter aluminum silicate insulation cotton, locally reinforced installation of hinges and handles door

Buckle: Container pull rod handle, beautiful, heat-resistant aluminum silicate sealing strip with good sealing performance and long service life

Circulating system:

Hot air circulation: The circulation adopts horizontal air supply and centrifugal fan blades, with good uniformity2Blower motor: long shaft motor with stainless steel fan blades

Set, place the electric motor on top of the ovenMotor power:750W*2

(One set for each studio on the left and right)intake/

Exhaust:2Air intake system: quantityOne,φ60

mm2Exhaust system: quantityOne,φ60

Millimeter, can be equipped with a ventilation device, connected to the outside of the workshop to remove exhaust gas

Heating system:Heating element: High quality stainless steelU4Type covered far-infrared heater (lifespan)

Over 10000 hours)Electrical system: (Two independent control systems are installed together on the left side of the oven),

Control system with independent socket installed internallyTemperature control device: intelligentLEDDouble digital high-precision temperature control system, temperature control accuracy±1100℃, the temperature ranges from room temperature to℃ can be adjusted arbitrarily and hasPID

Self setting, automatic constant temperature and other functionsover temperature protection:

Configure an independent over temperature protection device, which will automatically sound an alarm and cut off heating when the temperature exceeds the upper limitTemperature measuring device: stainless steel armorPT100SensorsK

Dividing thermocouple sensor provides long-term stable signal transmissionTiming device: high-precision digital display automatic timer,0-99.99

Hour setting, can preset baking timeAlarm system:APT/AD16

A type of sound and light alarm system, which will sound and light an alarm when the time is up and automatically cut off the heatingCurrent and voltage:380V/50Hz

(Current and Voltage Meter)

Electrical components: using well-known brand electrical appliances

Safety devices: leakage, short circuit, overload protection; Overload and phase loss protection for blower motor

1.Additionally, accessories can be selected according to your needs: 2.Increase or decrease the number of layers 3.Stainless steel shelf; Load bearing shelves; Baking tray, etc 4.Staged program temperature control 5.over temperature protection

6.Mobile wheels 7.Strong exhaust ventilation 8.Temperature recorder 9.Observation windowComputer remote control, touch screenPLC

control