Touch screen liquid density meterXFCNMD-3005LAdopting GermanyHBMSensor, stable reading, automatic overload protection, sturdy and durable. 5-inch touch screen touch operation, light touch0.1Respond to readings in seconds, easy to operate.Any liquid with fluidity can be measured(Real solution, dispersion, suspension, emulsion, viscous liquid, slurry and other liquid with fluidity, such as flux, pine perfume, ethanol, glycol, methanol, sulfuric acid, copper sulfate, sodium hydroxide, potassium hydroxide, sodium chloride, electrolyte, vegetable oil, grease, resin, flour milk, soybean milk, milk, etc)Similar products can be quickly measured.

Function description:

1.Digital display direct reading, no need for manual calculation, just take50mlSample, one click direct reading of liquid: density, concentration%Bo Mei Du, relative density, without the tedious debugging and operation of the Wechsler balance and specific gravity bottle method, one click direct reading, simple operation.

2.Fast direct reading type,0.1Read within seconds, fully automatic zero point tracking, and peel weight throughout the entire process;

3.Built in battery, can also be used in case of power failure

4.It has the function of setting the upper and lower limits of specific gravity, and automatically alarms if the data is not qualified;

5.Compensation function for errors caused by air buoyancy;

6.containRS-232CCommunication interface, easy to connectPCOptional printerXF-68Thermal printer orXF-69The label printer prints measurement data.

Technical Parameter:

model:XFCNMD-3005L XFCNMD-1501L

Weighing range:0.005-300g 0.001-150g

Density readability:0.001 g/cm3 0.0001 g/cm3

Measurement platform: Stainless steel test bracket

Range test: Density>1、 ＜1 All can be tested【0.001g/cm3-7.800g/cm3】

Measurement type: Any liquid with fluidity

The results show that: Density, Bomei degree, relative density, concentration, average density, densityzuiSmall value, densityzuiLarge value

measuring principle Archimedes' principle buoyancy method

Time : About5second

display: 5Inch industrial touch screen

Parameter setting: Specific gravity hammer density,Weight Setting,Density upper and lower limit setting,Concentration parameter setting,Standard liquid density setting

Data statistics: automatic100The function of saving group density values and automatically displaying the average, maximum, and minimum values based on the number of saved groups

Correction method: Single point automatic calibration,Multi point automatic correction,Pure water calibration|verify

Data interface: standardRS-232interface,metersUSBinterface

Choose accessories:XF-58Density meter thermal printer, multi-point calibration weight group, label printer, anti-corrosion liquid component, viscous liquid density component

supply voltageAC100V~240V 50HZ/60HZ

Outer packaging size long42.5 cmX width17.5 cmX high32.5cm

Standard accessories: ① Liquid specific rack1 ② Special liquid specific gravity hammer1 ③ Hook X1 ④50mlBeaker x1 ⑤ Specialized support x1 ⑥ Host X1 ⑦ Calibration weight x1 ⑧ Power Supply Unit1