VIP member
Textile axial flow fan
1. Overview of Textile Axial Flow Fans FZ40/35-11 Axial Flow Fans are mainly used in textile factory air conditioning rooms and can also be used for v
Product details
1. Overview of Textile Axial Flow Fan
There are 7 machine numbers for FZ40-11 axial flow fans, including No. 8, 9, 10, 11.2, 12.5, 14, and 16. There are three machine numbers for FZ35-11 axial flow fans: No. 18, No. 20, and No. 22.4. There are three types of blades with different machine numbers: 5, 8, and 10. The blades can be installed at 5 angles, including 8 °, 11 °, 14 °, 17 °, and 20 °. Due to differences in the number of blades, installation angle, rotational speed, and static guide vane opening, each machine number has different wind pressure, air volume, and power consumption. Therefore, this type of fan is extremely advantageous for use in the air conditioning room of textile factories. When seasonal temperature changes can be regulated using a multi speed motor, while day and night temperature changes can be changed using a static blade adjustable device, saving electricity is greatly effective.
2Textile axial flow fanworking conditions
Environmental temperature:- 20~+40℃；
Humidity: less than 90%;
Medium: Air (with a dust content not exceeding 100mg/m3);
Power supply: three-phase, 380V/50Hz.
3Textile axial flow fanapplication
Fans can be widely used for ventilation and air exchange in textile workshops, cold storage, and other places.4Textile axial flow fanProcessing technology
The fan impeller is made of steel, the hub is hydraulically stretched and formed, the blades are hydraulically formed after stamping, and the blades are welded and assembled with the hub. The impeller has undergone static and dynamic balance correction, and the balance accuracy is not greater than G5.6 level.The outer flange is made by integral flanging and spinning.
5. Axial flow fan for textile air conditioning spray humidification
The spray axial flow fan is equipped with a specially designed mechanical atomizer for spray, so that the air and water mist can be directly mixed for heat and moisture exchange, which changes the traditional mode of the original air conditioning system fan supplying air and spraying air with spray pipes, thus simplifying the structure of the spray chamber, and achieving the effects of reducing the water vapor ratio, improving the heat and moisture exchange efficiency, water saving and energy saving. Therefore, the spray axial flow fan has been widely used in the technical transformation of the air conditioning system of textile mills across the country.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-