Temperature controlled magnetic dual digital mixer

• brief introduction

The 85-2A dual digital constant temperature magnetic stirrer is widely used in various universities, environmental protection, scientific research, health, epidemic prevention, petroleum, metallurgy, chemical and medical institutions, and is an ideal tool for laboratory technicians.
2、 Characteristics
The 85-2A dual digital constant temperature magnetic stirrer is an improved version of the 78-2 magnetic stirrer. This instrument has good performance, no noise or vibration, excellent stirring effect, stepless speed regulation, intelligent touch operation, temperature control, and beautiful appearance.
3、 Performance
1. Power supply: single-phase AC 50HZ 220V ± 10V
2. Electric power: 25W Heating power: 300W
3. Infinite speed regulation: 0-1600 revolutions per minute
4、 Usage method
When using this instrument, first check if all the accessories accompanying the machine are complete, then install the fixtures in order and place the beaker that needs to be stirred in the center of the chrome plate. Add the solution and place the stirrer in the beaker solution. Turn on the power and the indicator light will turn on to start working. The speed is gradually adjusted from low to high, and it is not allowed to start the stirrer directly at high speed to avoid asynchronous stirring and jumping. Set temperature: Press the SET key to set or view the temperature set point. Press the SET key once and the digital display character will start flashing, indicating that the instrument has entered the set state. Press the △ key to increase the set value, press the ▽ key to decrease the set value. Long press the △ key or ▽ key to quickly change the data. Press the SET key again to return the instrument to the normal state and complete the temperature setting.
5、 Precautions
1. To ensure, please connect the ground wire when using.
2. Heating time should generally not be too long, intermittent use can prolong the service life.
3. Medium speed operation can work continuously for 8 hours, while high-speed operation can work continuously for 4 hours.
4. Do not heat when not stirring.
6、 List of complete machines
1. 1 complete machine, 2 mixers
3. 1 power cord 4, chrome plated pole 1
5. 1 chrome cross joint 6, 1 rubber clamp head
7. 2 adhesive wood fastening screws, 8 pieces, and 1 instruction manual
9. 1 warranty card


Our factory's products:
(In addition to the following products, our factory can also customize instruments according to customer needs. Consultation)
Series of incubators, series of gas bath and water bath constant temperature oscillators, series of speed regulating multi-purpose oscillators, series of magnetic stirrers, electric stirrers, series of water bath pots, sand baths, water tanks, centrifuges, series of crushers, grinders, homogenizers, series of stainless steel electric heating plates, lifting tables, constant temperature plates, series of quartz sub boiling and stainless steel distilled water dispensers, series of electric furnaces, constant temperature carriers, series of analytical instruments.