1、 Equipment Overview: The waterproof test device for automotive connectors is used for detecting the airtightness of automotive wiring harnesses. During the experiment, a series of airtight matching connections will be made and immersed in the solution. The sample will be pressurized at a rate of 10KPA per minute until it reaches 50KPA. After turning off the external pressurization device and maintaining it for about 60 seconds, the pressure leakage value will be measured
2、 Main technical parameters:
1. Control mode: PLC control, touch screen human-machine interface operation;
２. Flange type pressure storage tank capacity: 6L;
3. Maximum test pressure: 60Kpa;
4. Boosting rate: 10kPa/min;
5. Pressure pump: automatic pressure pump;
6. Storage tank capacity: 10L;
Material of storage tank 7: SUS304 # stainless steel;
8. Display mode: digital display, accuracy: ± 0.5%;
9. Pressure holding method: automatic pressure holding, automatic pressure relief upon completion of the test;
10. The time display can be set on the touch screen from 0 to 99999 seconds;
11. Industrial formed aluminum frame: size approximately (W * D * H) 1000 * 500 * 1200mm