VIP member
TQ44K series medium thick plate high-speed uncoiling leveling line
Product features: This production line adopts the form of leading out the plate head from the bottom of the steel coil
Product details
Product Features
The production line adopts the form of leading out the plate head from the bottom of the steel coil. The basic construction project of this production line is relatively small, and the feeding and guiding are more convenient. The configured feeding vehicle transports the steel coil to the middle of the uncoiler while rotating the steel coil plate head towards the inclined wedge stripping and guiding direction, exposing it in the direction of the leveling machine. The concave convex rollers installed at the entrance of the leveling machine can improve the longitudinal bending of the sheet metal. Used for unwinding, leveling, and cutting thicker metal coils. Configure a dual head edge cutting machine, and roll the edge wire to obtain high-quality four edge cutting technology.
Main technical parameters
| project | unit | Selectable range |
| Processing plate thickness | mm | 4-16, 5-20, 6-25, 8-30 |
| Standard board width | mm | 1500, 2000, 2200, 2500, 3000 |
| Load bearing capacity of unwinding machine | t | 20. 30, 45 |
| Leveling accuracy | mm/㎡ | 1.5, 2.0 |
| Precision of fixed length | mm | ±1.0 |
| Maximum linear speed of the unit | m/min | 6. 10, 15, 18 |
| Total power of the unit | kw | 160-420 |
| Due to the continuous improvement of the product, sample parameters are subject to change without prior notice! | ||
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-