The detection device of the 600-9 online mass flowmeter is installed in the chamber of the flow sensor, without any obstacles or movable parts in the actual process, and is not affected by adverse factors in the production process. The minimum diameter is 1/16 inch (1.6mm), and it can measure a minimum flow rate of 3.79 milliliters per minute. It can measure liquids, mud, gases, and uniform solid powders. And provide a rich selection of liquid receiving materials to meet the measurement needs of different corrosive media, with negligible pressure loss generated on the sensor.
Depending on the application scenario and the medium being measured,The 600-9 flow sensor can be divided into industrial grade, sanitary grade, and UHP type

Product Features：

1. 600-9 industrial grade mass flowmeter
feature

Direct and unobstructed design

Multiple connection methods to choose from

Measurable liquids, gases, slurries, homogeneous solid particles, and various corrosive media

turndown ratio100：1

The pressure loss can be ignored

No movable parts

2. 600-9 Sanitary Quality Flow Meter
feature

316L low sulfur stainless steel material

All welded, non oxidized structure

CIP/SIP (In Situ Cleaning, In Situ Sterilization) Design

The traffic unit structure conforms toNEMA 4, 7. Explosion proof requirements

Compliant with the United States3A certification

Other Same600-9 industrial grade
3. 600-9 UHP grade mass flowmeter
feature

316L low sulfur stainless steel material

All welded, non oxidized structure

CIP/SIP (In Situ Cleaning, In Situ Sterilization) Design

Ultra high purity design of 15RA

Process connection method:Tri Clamp, VCR, VCO, and pipe welding

Other Same600-9 industrial grade

Technical Specifications：

Flow range:0-0.3 liters/minute or greater (gas)
0-0.1 milliliters per minute or larger (liquid)
For other inquiries, please consult the manufacturer
Accuracy:± 0.5% FS or 2% reading, whichever is better.
Repeatability:0.2%
Response time: ＜500ms（液体）
1-2 seconds typical (gas)
Pressure range:0-1200 PSI (8.3MPa) typical
0-10000 PSI (69Mpa) determined by pipeline size
Medium temperature range:-40~+177 ℃ (standard)
-156-593 ℃ (optional)
Pipe diameter:1/16 "to 4", please consult the manufacturer for other caliber requirements
Range ratio:100:1 (standard), 1000:1, 10:1 (optional)
Flow components: Construct in accordance withNEMA (International Electrical Manufacturers Association) 4.7-9 Explosion proof Requirements
Electrical wiring:1/2 "
Sensor material:316SS or 316L (standard), Hastalloy，Monel，Inconel，tantalum，TItanium，
gold, plaTInum，nickel，Carpenter 20 等
Connection method: FlangesSwagelok、NPT、VCR、VCO、Tri-Clamp、concentric reducer、flared、
sanitary、wafer、barbed、welded 等
Coating: Teflon (polytetrafluoroethylene), tungsten, carbideHMF (Inorganic Ceramic Membrane), etc