VIP member
TH63 series fixed column horizontal machining center
TH63 series fixed column horizontal machining center
Product details
Machine tool features:
The high rigidity machine bed structure developed through FEM finite element analysis; The casting is made of resin sand and undergoes aging treatment to fully eliminate internal stress, ensuring good precision retention.
Each axis guide rail adopts a sliding guide rail form, with the upper guide rail quenched and the lower guide rail coated with PTFE wear-resistant material. It has high positioning accuracy, large bearing capacity, good cutting vibration resistance, and ensures high precision and stability.
The standard configuration of the gearbox transmission spindle adopts a front four rear two layout for the spindle bearings. The high-precision front group bearings are FAG and a pair of radial thrust ball bearings, with an inner diameter of Φ 95 and a spindle taper BT50, which can meet the requirements of rough and fine machining processes.
The standard configuration is a 360 × 1 ° rotary worktable with gear positioning, high indexing accuracy, and good rigidity. It can perform multi-faceted machining on parts after one clamping.
|
|
TH6363B |
||
|
workbenches |
Pallet sizes |
mm |
630×630 |
|
Workbench T-shaped slot |
mm |
5-18×120 |
|
|
Maximum load-bearing capacity of the pallet |
kg |
800 |
|
|
Maximum size of workpiece (diameter x height) |
mm |
1000×1000 |
|
|
The distance between the workbench and the ground |
mm |
1000 |
|
|
Minimum division degree of workbench |
linear measure |
360 × 1 °/360000 × 0.001 ° (continuous turntable optional) |
|
|
trip |
X/Y/Z axis travel |
mm |
700/750/760 |
|
Workbench center to spindle end face |
mm |
155~915 |
|
|
Workbench surface to spindle center |
mm |
35~785 |
|
|
main shaft |
Range of spindle speed |
rpm |
50~4000 |
|
Maximum spindle torque (continuous/15 minutes) |
N.m |
89/200(1：1.28)； 420/710( 1:6) |
|
|
spindle |
kw |
11 |
|
|
boring |
|
BT50 |
|
|
Feed Speed |
X/Y/Z axis fast feed speed |
m/min |
15 |
|
X/Y/Z axis cutting feed rate |
m/min |
5 |
|
|
Cutting tool device |
Tool capacity |
grasp |
24 |
|
Maximum single blade weight |
kg |
18 |
|
|
Maximum tool length |
mm |
400 |
|
|
Knife handle/zipper type |
|
MAS BT50 / MAS P50T-Ⅰ |
|
|
Tool change time (knife knife) |
second |
4.5 |
|
|
Maximum diameter of cutting tool (full tool) |
mm |
Φ110 |
|
|
Maximum diameter of cutting tool (adjacent empty tool) |
mm |
Φ200 |
|
|
control system |
|
Standard configuration FANUC-0i-MD system |
|
|
accuracy |
X/Y/Z axis positioning accuracy |
mm |
0.025 (standard)/0.015 (optional grating) |
|
X/Y/Z axis repeat positioning accuracy |
mm |
0.016 (standard)/0.008 (optional grating) |
|
|
B-axis positioning accuracy |
“ |
10 (gear plate)/10 (circular grating) |
|
|
B-axis repeat positioning accuracy |
” |
4 (gear plate)/6 (circular grating) |
|
|
MACHINE SIZE |
cover an area |
mm |
4000×4000×3000 |
|
Machine weight |
T |
12 |
|
|
Machine tool power source |
Compressed air pressure |
Mpa |
0.5~0.8 |
|
Compressed air consumption |
L/min |
500 |
|
|
Power supply (3-phase AC380V, 50/60HZ) |
KVA |
60 |
|
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-