VIP member
TCG3212~4012 precision reducer NSP series
Corresponding to TCG series large-sized models 3212 and 4012 reducers. TCG roller+reducer integration simplifies customer design and assembly, improvi
Product details
talent
-
high-precision
Precise cycloidal gears and multiple high-precision rolling pins mesh simultaneously to achieve high-precision transmission accuracy.
-
rigidity
The high meshing rate of the transmission components disperses the load, resulting in extremely high rigidity.
-
Easy to install motor
Match the installation flanges of various brands of motors for customers, and install the motors directly after purchase.
-
Improve customer installation efficiency
Optimize the design of the entire combination scheme to facilitate customer selection and use.
- Model representation
- Specification Table
Model representation
Differential reducer with roller
- NSP
- 1
- 32A
- 2
- PCA
- A
- 6
- 1. Product Name
- NSP series
- 2. Code
- 32A,32C,40C
- 3. Reduction ratio
- 19,39
- 4. Motor installation markings
-
Please refer to the external dimension diagram or the motor&reducer correspondence table
- 5. Roller surface treatment
-
1: No surface treatment
2: Black chrome plating
3: Fluorinated black chrome plating
- 6. Roller accuracy level
-
A: Ordinary level
B: Precision grade
- 7.TLS
(TCG lubrication block) -
Unmarked: No TLS
L: There is TLS
TLS Product Information
Specification Table
| Project/Specification |
|---|
| NSP32A | NSP32C | NSP40C |
|---|
| Corresponding rack and gear diagram model | |
|---|---|
| Reduction ratio | |
| Rotation direction (relative to the input shaft, the rotation direction of the output shaft) | |
| Allowable rated torque | N・m |
| Peak acceleration torque | N・m |
| Instantaneous maximum torque | N・m |
| Output shaft allows radial load ※ 1 | N |
| Allow average input speed | rpm |
| Maximum input speed | rpm |
| Converted to the inertia of the input shaft ※ 2 | ×10-4kg・m2 |
| Recommended motor capacity | W |
| Input aperture | mm |
| Outline Drawing | |
| cad data | |
| sample | |
| operation instructions | |
| CRA3212A、RGF3212A、RGD3212A | CRC3212A、RFC3212A、RDC3212A | CRC4012A、RFC4012A、RDC4012A | |||||||||
| 19 | 39 | 19 | 39 | 19 | 39 | ||||||
| reverse direction | reverse direction | reverse direction | |||||||||
| 220 | 366.6 | 1146 | |||||||||
| 403.3 | 641.5 | 1375.2 | |||||||||
| 440 | 1150 | 1986.4 | |||||||||
| 3600 | 6000 | 15000 | |||||||||
| 2500 | 2500 | 1500 | |||||||||
| 4500 | 4500 | 2500 | |||||||||
| 13.38 | 12.49 | 13.38 | 12.49 | 70.32 | 66.64 | ||||||
| 0.75～2.5 | 0.85～5 | 1~7 | |||||||||
| 35 | 35 | 55 | |||||||||
| 28 | 28 | 42 | |||||||||
| 24 | 24 | 35 | |||||||||
| 22 | 22 | 28 | |||||||||
| 19 | 19 | 24 | |||||||||
| – | – | 22 | |||||||||
|
PDF
|
PDF
|
PDF
|
|||||||||
|
CAD
|
|||||||||||
|
PDF
|
|||||||||||
|
PDF
|
|||||||||||
※ 1 Allowable radial load refers to the load value when the load position is located on the diameter of the roller pitch circle.
※ 2 is a numerical value that includes the combination of reducer and roller.
The recommended motor capacity is an estimated value. Please make sure to select the motor correctly before referring to the values in this sample
In the case of continuous rotation or high-frequency forward and backward operation, please confirm with our company again.
Quick matching table for motor installation marks (flange codes) corresponding to models of Mitsubishi, Yaskawa, Panasonic, and Fuji Electric.
PDF
(All motors other than the four motor manufacturers mentioned above can be matched.)
Please refer to the motor outline drawing and the following dimension diagram to correspond with the corresponding motor installation marks (flange code). Or contact us to confirm.
Dimensional drawings and selection of flange models for motor installation
NSP22A and NSP32C models without motor installation flange
When the first and second digits of the motor installation mark (flange code) are "00", it indicates that the reducer does not have a motor installation flange.
| model |
|---|
| A | B | C | D | E | F | G | H | Mass kg | PDF drawings | 3D drawings |
|---|
| NSP32□PCA-□□-00019 |
|---|
| NSP32□PCA-□□-00022 |
| NSP32□PCA-□□-00024 |
| NSP32□PCA-□□-00028 |
| NSP32□PCA-□□-00035 |
| 19 | 60 | 34 | 20 | 10 | 23 | 26 | 176.5 | 25 | PDF |
CAD |
| 22 | 60 | 60 | 20 | 10 | 23 | 26 | 176.5 | 25 | PDF |
CAD |
| 24 | 60 | 55 | 20 | 10 | 23 | 26 | 176.5 | 25 | PDF |
CAD |
| 28 | 70 | 53 | 18 | 9 | 26 | 24 | 174.5 | 25 | PDF |
CAD |
| 35 | 75 | 74 | 18 | 9 | 28 | 24 | 174.5 | 25 | PDF |
CAD |
The rollers included with NSP are specially designed (special type), and standard rollers (CPA/CPC) cannot be installed on NSP reducers.
NSP40C type without motor installation flange
When the first and second digits of the motor installation mark (flange code) are "00", it indicates that the reducer does not have a motor installation flange.
| model |
|---|
| A | B | C | D | E | F | G | H | I | Mass kg | PDF drawings | 3D drawings |
|---|
| NSP40CPCA-□□-00022 |
|---|
| NSP40CPCA-□□-00024 |
| NSP40CPCA-□□-00028 |
| NSP40CPCA-□□-00035 |
| NSP40CPCA-□□-00042 |
| NSP40CPCA-□□-00055 |
| 22 | 60 | 60 | 20 | 10 | 23 | 27 | 236.5 | M8 | 57 | PDF |
CAD |
| 24 | 60 | 55 | 20 | 10 | 23 | 27 | 236.5 | M8 | 57 | PDF |
CAD |
| 28 | 70 | 53 | 18 | 9 | 26 | 25 | 234.5 | M8 | 57 | PDF |
CAD |
| 35 | 75 | 103 | 18 | 9 | 28 | 25 | 234.5 | M8 | 57 | PDF |
CAD |
| 42 | 85 | 107 | 22 | 11 | 32 | 29 | 238.5 | M10 | 57 | PDF |
CAD |
| 55 | 105 | 110 | 25 | 12.5 | 40 | 32 | 241.5 | M12 | 57 | PDF |
CAD |
The rollers included with NSP are specially designed (special type), and standard rollers (CPA/CPC) cannot be installed on NSP reducers.
NSP22A, NSP32C type with motor installation flange mark A □□□
| model |
|---|
| mark | A | B | C | D | E | F | G | H | I | J | K | Mass kg | PDF drawings | 3D drawings |
|---|
| NSP32□ |
|---|
| A0119 | 19 | 80 | 120 | 32 | 34 | 16 | 6 | 23 | 100 | M6 deep 12 | 182.5 | 30 | PDF |
CAD |
| A0224 | 24 | 95 | 136 | 33 | 55 | 17 | 7 | 23 | 115 | M6 deep 12 | 183.5 | 29 | PDF |
CAD |
| A0319 | 19 | 95 | 136 | 33 | 34 | 17 | 7 | 23 | 115 | M8 deep 16 | 183.5 | 29 | PDF |
CAD |
| A0324 | 24 | 95 | 136 | 33 | 55 | 17 | 7 | 23 | 115 | M8 deep 16 | 183.5 | 29 | PDF |
CAD |
| A0422 | 22 | 110 | 166 | 36 | 60 | 20 | 10 | 24.5 | 145 | M8 deep 16 | 186.5 | 30 | PDF |
CAD |
| A0424 | 24 | 110 | 166 | 36 | 5 | 20 | 10 | 24.5 | 145 | M8 deep 16 | 186.5 | 30 | PDF |
CAD |
| A0428 | 28 | 110 | 166 | 36 | 53 | 20 | 12 | 24.5 | 145 | M8 deep 16 | 186.5 | 30 | PDF |
CAD |
| A0519 | 19 | 110 | 166 | 46 | 34 | 30 | 20 | 23 | 145 | M8 deep 16 | 196.5 | 30 | PDF |
CAD |
| A0522 | 22 | 110 | 166 | 46 | 60 | 30 | 20 | 23 | 145 | M8 deep 16 | 196.5 | 30 | PDF |
CAD |
| A0524 | 24 | 110 | 166 | 46 | 55 | 30 | 20 | 23 | 145 | M8 deep 16 | 196.5 | 30 | PDF |
CAD |
The rollers included with NSP are specially designed (special type), and standard rollers (CPA/CPC) cannot be installed on NSP reducers.
NSP40C type with motor installation flange mark D □□□
| model |
|---|
| mark | A | B | C | D | E | F | G | H | I | J | K | Mass kg | PDF drawings | 3D drawings |
|---|
| NSP40C |
|---|
| D0122 | 22 | 110 | 37 | 60 | 20 | 10 | 24.5 | 145 | M8 deep 16 | 246.5 | M8 | 69 | PDF |
CAD |
| D0124 | 24 | 110 | 37 | 55 | 20 | 10 | 24.5 | 145 | M8 deep 16 | 246.5 | M8 | 69 | PDF |
CAD |
| D0128 | 28 | 110 | 37 | 53 | 20 | 12 | 24.5 | 145 | M8 deep 16 | 246.5 | M8 | 69 | PDF |
CAD |
| D0224 | 24 | 110 | 47 | 55 | 30 | 20 | 23 | 145 | M8 deep 16 | 256.5 | M8 | 72 | PDF |
CAD |
| D0335 | 35 | 114.3 | 31 | 103 | 15 | 6 | 28 | 200 | M12 deep 24 | 240.5 | M8 | 66 | PDF |
CAD |
| D0442 | 42 | 114.3 | 35 | 107 | 16 | 6 | 32 | 200 | M12 deep 24 | 244.5 | M10 | 67 | PDF |
CAD |
The rollers included with NSP are specially designed (special type), and standard rollers (CPA/CPC) cannot be installed on NSP reducers.
NSP40C type with motor installation flange mark E □□□
When the first and second digits of the motor installation mark (flange code) are "00", it indicates that the reducer does not have a motor installation flange.
| model |
|---|
| mark | A | B | C | D | E | F | G | H | I | Mass kg | PDF drawings | 3D drawings |
|---|
| NSP40C |
|---|
| E0135 | 35 | 34 | 103 | 18 | 9 | 28 | M12 deep 18 | 243.5 | M8 | 63 | PDF |
CAD |
| E0242 | 42 | 37 | 107 | 19 | 8 | 32 | M12 deep 20 | 246.5 | M10 | 63 | PDF |
CAD |
| E0355 | 55 | 40 | 110 | 20.5 | 8 | 40 | M12 deep 24 | 249.5 | M12 | 64 | PDF |
CAD |
The rollers included with NSP are specially designed (special type), and standard rollers (CPA/CPC) cannot be installed on NSP reducers.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-