TCG1210~2510 precision reducer SFP-P series-Fornitore globale

Room 401, Building 4, Changfu Fenghua Garden, No. 75 Changfu Street, Qinhuai District, Nanjing City, Jiangsu Province

talent

Zero backlash

The teeth (rolling pins) always maintain contact at 2-3 points, and there will be no backlash in the forward and reverse directions.
The reduction mechanism does not use gears, but instead uses steel balls, which are preloaded to keep the transmission components in constant contact without generating backlash.
Convenient motor installation

The input hole adopts a clamping style that can clamp the circular output shaft of the motor, which can easily match the motors of various motor companies.
No customer assembly required

The gearbox and roller assembly are completed, and there is no need for customer assembly. (SFP-P type)
Low noise

No knocking sound of gear meshing, smooth rolling meshing, quiet!
High precision positioning

There is no backlash, allowing for high-precision positioning in both forward and reverse directions.

Model representation
Specification Table

Model representation

Zero backlash ball reducer with rollers

SFP: 1

70: 2

P:

C:

A:

10: 3

A0108: 4

20: 5

1: 6

A: 7

0:

0: 8

L: 9

1. Product Name

SFP series

2. Code

70, 85, 100, 125

3. Reduction ratio

8 (limited to 70 models only), 10, 20, 30, 40, 50 (limited to 125 models only)

4. Motor installation markings

Please refer to the external dimension diagram or the motor&reducer correspondence table.

5. Output shaft diameter

16 (70 type), 20 (85 type), 25 (100 type), 30 (125 type)

6. Roller surface treatment

1: No surface treatment

2: Black chrome plating

3: Fluorinated black chrome plated ※ 70 type only available with options 1 and 2

7. Roller accuracy level

A: Ordinary level

B: Precision grade

8. Installation board

F: There is an installation board

0: No installation board

9.TLS (TCG lubrication block)

Unmarked: No TLS

L: There is TLS

TLS Product Information

Specification Table

model

SFP70PCA				SFP85PCA				SFP100PCA				SFP125PCA

Corresponding rack and ring gear models
Reduction ratio
Rotation direction (relative to the input shaft, the rotation direction of the output shaft)
Torque	N・m
Peak acceleration torque	N・m
Instantaneous maximum torque	N・m
Output shaft allows radial load ※ 1	N
Allow average input number of rotations	rpm
Maximum Input Rotation Number	rpm
Converted to the inertia of the input shaft ※ 2	×10^-4kg・m²
Recommended motor capacity	W
Input shaft aperture	mm





Outline Drawing
cad data
Product samples
operation instructions

CRA1210A、RGF1210A				CRA1610A、RGF1610A、RGD1610A				CRA2010A				CRA2510A、RGF2510A、RGD2510A
8	10	20	30	10	20	30	40	10	20	30	40	10	20	30	40	50
reverse direction		same direction		reverse direction	same direction			reverse direction	same direction			reverse direction	same direction
9.50				25.5				47.7				87.5
9.50				40.7				70.1				123.4
14.3				50.9				95.5				175.1
500				1000				1500				2200
3000				3000				2000				2000
4500				4500				4000				4000
0.164	0.159	0.161	0.162	0.523	0.441	0.418	0.408	1.68	1.46	1.40	1.37	3.71	3.05	2.89	2.83	2.79
200	200	100	100	400	200	200	100	750	400	400	200	1500	750	750	400	400
14				14				19				24
11				11				16				22
8				8				14				19
–				–				11				16
–				–				–				14
PDF				PDF				PDF				PDF
CAD
PDF
PDF

※ 1 Allowable radial load refers to the load value when the load position is located on the diameter of the roller pitch circle.

The numerical value under the combination of 2 reducers and rollers.

Quick matching table for motor installation marks (flange codes) corresponding to models of Mitsubishi, Yaskawa, Panasonic, and Fuji Electric.

PDF

(All motors other than the four motor manufacturers mentioned above can be matched.)

Please refer to the motor outline drawing and the following dimension diagram to correspond with the corresponding motor installation marks (flange code). Or contact us to confirm.

Size diagram and selection of motor installation flange model (for the SFP-P series size diagram with integrated roller, please click here)

SFP70PCA type

The motor installation mark (flange code) consists of the following table "model"+(reducer input aperture F). For example: A0108

model

CA	CB	E	F	G	I	J	Mass Kg	model	PDF drawings	3D drawings

A01
A02
A03
B01


B02


Without intermediate flange

23	33	72	8	22	48	M3×6	1.4	SFP70PCA-A0108	PDF	CAD
				30	45	M3×6		SFP70PCA-A0208	PDF	CAD
				30	46	M4×8		SFP70PCA-A0308	PDF	CAD
		78	8	50	70			SFP70PCA-B0108	PDF	CAD
28	38		11					SFP70PCA-B0111	PDF	CAD
23	33		8			M5×10		SFP70PCA-B0208	PDF	CAD
28	38		14			M5×10		SFP70PCA-B0214	PDF	CAD
not have							1.3	SFP70PCA-00008	PDF	CAD
								SFP70PCA-00011	PDF	CAD
								SFP70PCA-00014	PDF	CAD

SFP85PCA type

The motor installation mark (flange code) consists of the following table "model"+(reducer input aperture F). For example: C0108

model

CA	CB	E	F	G	I	J	a	b	c	d	e	Mass Kg	model	PDF drawings	3D drawings

C01
E02
C03



C04


D01


D02
Without intermediate flange

23	33.5	88	8	30	45	M3×6	30	10	5	10	M4	3.6	SFP85PCA-C0108	PDF	CAD
					46	M4×8							SFP85PCA-C0208	PDF	CAD
				50	70								SFP85PCA-C0308	PDF	CAD
28	38.5		11				40	12	6	14	M5		SFP85PCA-C0311	PDF	CAD
			14										SFP85PCA-C0314	PDF	CAD
23	33.5		8			M5×10	30	10	5	10	M4		SFP85PCA-C0408	PDF	CAD
28	38.5		14				40	12	6	14	M5		SFP85PCA-C0414	PDF	CAD
		98	11	70	90								SFP85PCA-D0111	PDF	CAD
			14										SFP85PCA-D0114	PDF	CAD
			14			M6×12							SFP85PCA-D0214	PDF	CAD
not have												3.2	SFP85PCA-00008	PDF	CAD
													SFP85PCA-00011	PDF	CAD
													SFP85PCA-00014	PDF	CAD

SFP100PCA type

The motor installation mark (flange code) consists of the following table "model"+(reducer input aperture F). For example: E0111

model

CA	CB	E	F	G	I	J	a	b	c	d	e	Mass Kg	model	PDF drawings	3D drawings

E01


E02
E03


E04
E05
E06


Without intermediate flange

28	40	5	11	50	21	70	M4×8	40	12	6	M4	5.8	SFP100PCA-E0111	PDF	CAD
			14										SFP100PCA-E0114	PDF	CAD
			14				M5×10						SFP100PCA-E0214	PDF	CAD
		8	11	70		90							SFP100PCA-E0311	PDF	CAD
			14										SFP100PCA-E0314	PDF	CAD
38	47		19		24			50	15	14	M5	5.7	SFP100PCA-E0419	PDF	CAD
28	40		14		21		M6×12	40	12	10	M4		SFP100PCA-E0514	PDF	CAD
38	47		16		24			50	15	14	M5		SFP100PCA-E0616	PDF	CAD
			19										SFP100PCA-E0619	PDF	CAD
not have												5.3	SFP100PCA-00011	PDF	CAD
													SFP100PCA-00014	PDF	CAD
													SFP100PCA-00016	PDF	CAD
													SFP100PCA-00019	PDF	CAD

SFP125PCA type

The motor installation mark (flange code) consists of the following table "model"+(reducer input aperture F). For example: F0114

model

AA	B	CA	CB	D	E	F	G	I	J	a	b	c	d	e	Mass Kg	model	PDF drawings	3D drawings

F01
F02
F03


F04



F05



E06
E07
E08


G01


G02


Without intermediate flange

241.5	33	38	47	5	128	14	50	70	M4×10	40	12	6	14	M5	10.9	SFP125PCA-F0114	PDF	CAD
									M5×10							SFP125PCA-F0214	PDF	CAD
				8			70	90							10.8	SFP125PCA-F0314	PDF	CAD
						19				50	15	7.5	18	M6		SFP125PCA-F0319	PDF	CAD
						14			M6×12	40	12	6	14	M5		SFP125PCA-F0414	PDF	CAD
						16				50	15	7.5	18	M6		SFP125PCA-F0416	PDF	CAD
						19										SFP125PCA-F0419	PDF	CAD
						14	80	100		40	12	6	14	M5		SFP125PCA-F0514	PDF	CAD
						16				50	15	7.5	18	M6		SFP125PCA-F0516	PDF	CAD
						19										SFP125PCA-F0519	PDF	CAD
		56	65			24	95	115		55			20		10.7	SFP125PCA-F0624	PDF	CAD
									M8×16							SFP125PCA-F0724	PDF	CAD
		38	47			16				50			18			SFP125PCA-F0816	PDF	CAD
						19										SFP125PCA-F0819	PDF	CAD
252.5	44		58	10	158	16	110	145							11.7	SFP125PCA-G0116	PDF	CAD
						19										SFP125PCA-G0119	PDF	CAD
		56	76			22				55			20			SFP125PCA-G0222	PDF	CAD
						24										SFP125PCA-G0224	PDF	CAD
not have															10.1	SFP125PCA-00014	PDF	CAD
																SFP125PCA-00016	PDF	CAD
																SFP125PCA-00019	PDF	CAD
																SFP125PCA-00022	PDF	CAD
																SFP125PCA-00024	PDF	CAD

talent

Zero backlash

Convenient motor installation

No customer assembly required

Low noise