TC-6180BConstant temperature and constant current atmosphere/TSP comprehensive sampler

(Optional)Built in high-energy lithium battery）

Atmospheric and particulate matter sampling require external AC power supply

Product Introduction

This instrument uses solution absorption method to collect various harmful gases in the ambient atmosphere and indoor air, and uses filter membrane weighing method to capture total suspended particles (such as...) in the ambient atmosphereTSP, PM10, PM2.5, etc. are widely used in environmental protection, occupational health, factories and mines, colleges and universities, scientific research and other institutions.

Adopting standards

HJ/T 374-2007Technical requirements and detection methods for total suspended particulate matter samplers

JJG 956-2013Atmospheric Sampler

JJG 943-1998Total suspended particulate matter sampler

HJ/T 375-2007Technical Requirements and Testing Methods for Environmental Air Samplers

HJ 618-2011The Environmental AirDetermination of PM10 and PM2.5 by Weight Method

HJ/T 93-2013 "Technical Requirements and Detection Methods for Particulate Matter (PM10 and PM2.5) Samplers in Environmental Air"

Q/0213TWB 001-2014 Enterprise Standard

main features

1. AC/DC dual-use, built-in lithium battery, continuous operation greater than15 hours

2. Electronic flowmeter, constant temperature and current sampling, two atmospheric channels and one particulate matter channelEither path can be individually controlled and started/stopped separately;

3. High speed processor automatically calculates and controls sampling flow rate,Automatically compensate for flow changes caused by voltage fluctuations and resistance changes;

4. Air sampling circuit equipped with anti backflow suction drying bottleTo prevent the absorption liquid from being sucked back;

5. Pipeline blockage protection functionDuring the atmospheric sampling process, if the pipeline is blocked or the load is too high, the system will automatically stop the pump to protect the instrument from damage due to long-term overload. If the load is greater than negative 20kPa for a long time, the protection function will be automatically activated;

6. Atmospheric sampling has a constant temperature automatic heating function;

7. High performance ultra-low frequency brushless diaphragm pump is used for atmospheric sampling, with a long service life;

8. The atmospheric sampling adopts a red blue dual color gas path connection tube, which easily and accurately connects the gas path;

9. Automatically measure ambient atmospheric pressure and temperature, display real-time sampling flow rate, cumulative sampling volume, and standard condition volume;

10. Built in real-time clock, which can pre-set the sampling start time;

11. Timed sampling can be set, with multiple samples taken at equal intervalsThe sampling frequency can be within1～99 arbitrary settings;

12. The particulate matter sampling adopts an imported DC fan with a continuous operating lifeMore than 20000 hours.

13. TSP/PM10/PM2.5The sampling head is made of aluminum alloy material and has anti-static adsorption；

14. Power off protection function, automatic sampling of incoming calls;

15. Chinese LCD display with automatic contrast adjustment, capable of operating below zeroNormal operation at 30 degrees Celsius;

16. Equipped with a height adjustable triangular bracket;

17. haveRS232 digital communication interface, can be connected to an external printer for convenient data output.

TECHNICAL INDEX

dress box one