TAG-8000 wireless high-voltage phase analyzer (hereinafter referred to as "the instrument") is used to detect whether the power sources on both sides of the closed-loop point circuit breaker in the ring network or dual power supply power grid are in phase. Before closing the two power sources in a closed loop, it is necessary to perform phase verification operation, otherwise a short circuit may occur. The instrument is suitable for live phase operation of 6KV~220KV transmission lines, and has the functions of high voltage testing and phase sequence verification.

The instrument adopts wireless transmission technology, which is safe and reliable to operate, easy to use, overcomes many disadvantages of wired phase detectors, and meets the relevant standards for quality supervision, inspection and testing of national power safety tools. Compared with wired phase converters, its main advantage is the removal of the leads connecting the two ends of the power grid (power source), which is not limited by any terrain or facility structure and improves safety.

Wireless High Voltage Nuclear Phaser, Nuclear Phaser, Nuclear Phaser, Nuclear Phase Device, Wireless Nuclear Phaser, Search High Voltage Nuclear Phaser, High Voltage Nuclear Phaser, Speech Nuclear Phaser, Speech Nuclear Phaser, Wireless Nuclear Phaser, Digital Nuclear Phaser, Digital Nuclear Phaser.

The instrument consists of an X transmitter, a Y transmitter, and a receiving host. Two detection transmitters can determine whether the circuit is live and then emit measured phase and frequency signals. The receiving host receives signals from two detection and transmission devices to determine whether the two lines are in phase.

1. Phase difference accuracy: error ≤ 5 °;

2. Frequency accuracy: ± 0.1HZ;

3. The voltage level measured by this product is 6KV-220KV;

4. The transmission distance between the transmitter and the receiving host is greater than 130 meters, and the maximum distance between the two transmitters is about 260 meters;

5. The result judgment (in-phase, out of phase) adopts the A-level standard, with a phase difference of ≥ 30 ° being out of phase and a phase difference of<30 ° being in phase;

6. Real voice prompts, male voice "same phase", female voice "different phase, please pay attention";

7. The screen displays the phase difference, frequency, waveform, and loss plot of two lines simultaneously;

8. The host displays the battery level and automatically shuts down after half an hour of inactivity;

Both transmitters and receivers are equipped with rechargeable lithium batteries;

10. It has the function of high-voltage electrical testing and phase sequence verification;

11. Leakage current during high voltage measurement is less than 10uA;

12. The working power consumption of the transmitter is less than 0.1W, and the working power consumption of the receiving host is less than 0.3W;

13. The capacity of the host lithium battery is about 2200mAH, and the capacity of the transmitter battery is about 350mAH;

If the instrument is used 10 times a year for 30 minutes each time, the charging cycle is about 1 year;

15. Working environment: -35 ℃ -+45 ℃, humidity ≤ 95% RH;

16. Storage environment: -40 ℃ -+55 ℃, humidity ≤ 95% RH;

17. Whole machine weight: approximately 4.5KG;

18. Packaging dimensions: 71cm in length, 26cm in width, and 11cm in height.