VIP member
T35, FT35 (PP) axial flow fan
The purpose of T35 axial flow fan: T35 axial flow fan is a common ventilation product and a series of axial flow fans in the category of axial flow fa
Product details
The purpose of T35 axial flow fan
T35 axial flow fan is a common ventilation product and a series of axial flow fans in the category of axial flow fans. T35 is mainly used for ventilation and heat dissipation in general factories, warehouses, offices, residential areas, etc. If the casing is removed, it can also be used as a free fan or installed in series at intervals in longer exhaust pipes to increase the air pressure in the pipes.When installing axial fans in the distribution room, T35 series axial fans are generally preferred.The T35 axial flow fan is based on similar foreign products. Through model testing and research, the fan blade type was determined, and a cylindrical hub structure was adopted. At the same time, the motor was modified to reduce flow losses, thus increasing the fan efficiency to 77% based on the circular area and 89.5% based on the outlet ring area. The noise ratio A was reduced by 3.6dB, and the strength at the blade root was enhanced to avoid blade fracture.FT35 (PP) anti-corrosion axial flow fanIts structural performance is the same as that of the T35 universal axial flow fan, except for the difference in material selection,FT35 (PP) anti-corrosion axial flow fan is made of materials with anti-corrosion propertiesMade into.
T35 Axial Flow Fan Structure
The T35 axial flow fan is mainly composed of three parts: impeller, casing, and collector.
1. The impeller of T35 axial flow fan is composed of blades and hub, and the blades are made of thin steel plates and welded to the hub according to the selected installation angle.
2. The casing of T35 axial flow fan is composed of a wind duct and a bracket, both made of thin steel plates and profiles. The wind duct is cylindrical with a certain gap between it and the impeller.
3. The collector of T35 axial flow fan: composed of a collector flange and a collector, the collector is a circular arc streamlined shape, which can reduce the loss of airflow inlet, and is made of thin steel plate.
Installation precautions for T35 axial flow fan
① Before installation, it is necessary to carefully check whether the ventilation fan has been damaged or deformed due to packaging and transportation. If there is any damage or deformation, it should be repaired before installation can proceed.
② During installation, it is important to check for any looseness in the connecting parts. The gap between the blades and the air duct should be even and not scratched or bumped.
③ The weight of the pipeline connecting the air outlet should not be borne by the air duct of the fan, and additional support should be added during installation.
④ A collector must be installed at the inlet of the ventilation fan, and if possible, it is best to install a protective wire mesh.
⑤ The fan base must be naturally connected to the foundation plane, and it is not allowed to forcefully connect the base by knocking it to prevent deformation of the base. During installation, the base should be calibrated, iron pads should be added, the basic horizontal position should be maintained, and then the anchor bolts should be tightened.
⑥ After installation, it is necessary to conduct a test and wait for normal operation before it can be officially used.
Daily maintenance of T35 axial flow fan
Daily checks should be conducted to ensure that the air flowing through the ventilation fan is clean and dry, free from impurities and excessive water vapor.
When the T35 axial flow fan is idle for a long time and reused, it must be checked whether the connecting parts are firm and reliable, whether the rotation is flexible, and tested before it can be officially used.
Daily attention should be paid to whether there is any abnormal sound or increased vibration during the operation of the T35 axial flow fan. If any abnormal situation is found, it should be stopped for maintenance in a timely manner.
The above is an introduction to the T35 axial flow fan. For more information on the T35 axial flow fan, you can click on itOnline consultation
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-