VIP member
T35, BT35 (explosion-proof), FT35 (anti-corrosion) axial flow fans
The T35 axial flow fan is mainly used for ventilation and heat dissipation in general factories, warehouses, offices, residential areas, and other pla
Product details
purpose
T35The axial flow fan is mainly used for ventilation and heat dissipation in general factories, warehouses, offices, residential areas, etc. If the casing is removed, a left free fan can also be installed in series at intervals in a longer exhaust pipe to increase the air pressure in the pipe. The transported gas is non corrosive and significantly dusty, and its temperature should not exceed40℃.
T35On the basis of similar foreign products, the axial flow fan has been analyzed and compared, and the fan blade type has been determined through model experiments. A cylindrical hub structure has been adopted, and the motor has been modified to reduce flow loss structurally. As a result, the efficiency of the fan outlet has been improved by calculating the circular area77%Calculated based on the export ring area, increase to89.5%Noise ratioAThe sound has decreased3.6dBIt also enhances the strength at the root of the blade, avoiding the phenomenon of blade fracture.
BT35Explosion proof axial flow fans mainly discharge gases containing flammable, explosive, and non corrosive substances, and their temperature must not exceed40℃，Explosion proof motors are required for motors, and explosion-proof switches or switches should be kept away from explosive points. Wires in explosive areas must not have joints.
FT35The anti-corrosion axial flow fan mainly discharges gases containing corrosive substances, and its temperature shall not exceed60℃.
type
This series of fans is divided into № 2.8, 3.15, 3.55, 4, 4.5, 5, 5.6, 6.3, 7.1, 8, 9, 10, 11.2 according to the diameter of the impeller
There are a total of 13 machine numbers, each of which can be installed at 5 angles including 15 °, 20 °, 25 °, 30 °, and 35 °.
This series of fans adopts a direct connection structure where the impeller is directly mounted on the motor shaft. Facing the air inlet, the impeller rotates counterclockwise, and the intake direction is at the end of the impeller
structure
T35TheBT35TheFT35The axial flow fan mainly consists of an impeller and a casing,T35TheBT35All types are made of thin platesFT35The type is made of fiberglass.
impeller——Composed of blades and hub, the blades are made of thin plates (aluminum plates or fiberglass) and are connected to the hub at selected angles based on wind pressure and air volume
The casing is composed of a wind duct and a bracket. The wind duct is made of thin plate (fiberglass) and is cylindrical with a certain gap between it and the impeller.
T35The axial flow fan is mainly used for ventilation and heat dissipation in general factories, warehouses, offices, residential areas, etc. If the casing is removed, a left free fan can also be installed in series at intervals in a longer exhaust pipe to increase the air pressure in the pipe. The transported gas is non corrosive and significantly dusty, and its temperature should not exceed40℃.
T35On the basis of similar foreign products, the axial flow fan has been analyzed and compared, and the fan blade type has been determined through model experiments. A cylindrical hub structure has been adopted, and the motor has been modified to reduce flow loss structurally. As a result, the efficiency of the fan outlet has been improved by calculating the circular area77%Calculated based on the export ring area, increase to89.5%Noise ratioAThe sound has decreased3.6dBIt also enhances the strength at the root of the blade, avoiding the phenomenon of blade fracture.
BT35Explosion proof axial flow fans mainly discharge gases containing flammable, explosive, and non corrosive substances, and their temperature must not exceed40℃，Explosion proof motors are required for motors, and explosion-proof switches or switches should be kept away from explosive points. Wires in explosive areas must not have joints.
FT35The anti-corrosion axial flow fan mainly discharges gases containing corrosive substances, and its temperature shall not exceed60℃.
type
This series of fans is divided into № 2.8, 3.15, 3.55, 4, 4.5, 5, 5.6, 6.3, 7.1, 8, 9, 10, 11.2 according to the diameter of the impeller
There are a total of 13 machine numbers, each of which can be installed at 5 angles including 15 °, 20 °, 25 °, 30 °, and 35 °.
This series of fans adopts a direct connection structure where the impeller is directly mounted on the motor shaft. Facing the air inlet, the impeller rotates counterclockwise, and the intake direction is at the end of the impeller
structure
T35TheBT35TheFT35The axial flow fan mainly consists of an impeller and a casing,T35TheBT35All types are made of thin platesFT35The type is made of fiberglass.
impeller——Composed of blades and hub, the blades are made of thin plates (aluminum plates or fiberglass) and are connected to the hub at selected angles based on wind pressure and air volume
The casing is composed of a wind duct and a bracket. The wind duct is made of thin plate (fiberglass) and is cylindrical with a certain gap between it and the impeller.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-