1. Maximum thickness that can be cut: 6MM
2. Maximum board width that can be cut: 4000mm
3. Tensile strength of the board: 450N/MM²
4. Shear angle: 1 ° 30 '
5. Maximum distance of rear blocking material: 20-600mm
6. Blade length: 4100mm
7. Main motor power: 7.5KW

1. Thisswing-type plate shearsUsed for cutting steel plates with a thickness of 6mm and a width of 4000.

2. The strength of the sheared sheet metal shall be based on 450N/mm2. If other strength sheets need to be sheared, the thickness of the sheared sheet metal shall be correspondingly reduced.

3. This machine adopts a steel plate welding structure, hydraulic transmission, accumulator return cylinder return, stable and reliable operation, small size, light weight, and good rigidity.

4. Adjusting the blade clearance is quick and convenient. The machine is equipped with front and rear material stops, which are mechanically transmitted and displayed by a tachometer, and can be manually adjusted for easy and reliable adjustment. The front stopper adopts a ruler for counting and a stopper for positioning. In addition, there is lighting for marking and cutting, and the machine is equipped with a protective fence to ensure safe operation.

1swing-type plate shearsRack - a frame structure welded from steel plates, with good rigidity. Two cylinders are fixed on the left and right columns, and an auxiliary tool holder is provided on the workbench for easy micro adjustment of the lower tool holder. There is also a feeding rolling ball installed on the workbench, which is easy to operate.

2. The upper knife holder is a steel plate welded structure with good rigidity. It uses an eccentric sleeve as a fulcrum to perform reciprocating swinging under the drive of the left and right oil cylinders and the accumulator return cylinder to complete shearing.

The vertical support surface of the blade of the upper knife holder is lined with an arc-shaped curve to ensure consistency in the gap between the upper and lower blades during the shearing process.

3. Material pressing device - composed of several material pressing cylinders installed on the support plate in front of the frame. After the material pressing cylinder is filled with oil, the material pressing head presses down against the tension of the tension spring to compress the sheet metal. After the cutting is completed, it is reset by the tension of the tension spring. The magnitude of the compression force increases with the increase of the thickness of the sheared plate.