Supply Hebei overcurrent ultraviolet disinfection equipment

Supply Hebei overcurrent ultraviolet disinfection equipment

Quartz glass has a series of excellent physical configuration alloys to ensure quality, so closed tube diffusion often uses quartz tubes. Preparation of quartz tube: Select the inner diameter, wall thickness and other parameters of the quartz tube according to the different diameters of the diffusion silicon wafer.

The quartz sleeve of the ultraviolet sterilizer is made of 99.9% pure fused silica to ensure a high uv transmittance of zui. Quartz sleeves of various diameters are used in various water treatment, air sterilization, and other special sterilization equipment to solve the insulation problem of ultraviolet lamps and make the lamp tubes easy to clean, ensuring the maximum sterilization effect of ultraviolet lamps.

The resistance of the quartz tube can be detected by a multimeter. Set the multimeter to the buzzer position and place the red and black probes on both ends of the quartz tube, as shown in the figure below. At this point, the buzzer of the multimeter should sound and the pointer should point to zero. If the buzzer of the multimeter does not sound and the pointer points to infinity during detection, it indicates that the interior of the quartz tube is damaged.

When detecting the power supply voltage of the quartz tube, first adjust the range of the multimeter to the AC 250V voltage range, and place the red and black probes on the power supply end of the quartz tube, as shown in the following figure. At this point, observe the reading of the multimeter. If it is around 220V AC, it indicates that the power supply voltage of the quartz tube is normal. The high flow ultraviolet sterilizer should be installed at the outlet of the water tank or tower. If the water volume is large, the water pressure is high, or the pipeline network is too long, it is better to install it on the water supply main (branch) pipe close to the user.

Extending outward from both ends of the high flow ultraviolet sterilizer, there should be a space of 1 meter and 0.4 meters each for easy replacement of the lamp tube. In front of the control panel of the Hebei high flow ultraviolet sterilizer, there should be an accessible space of 0.6 meters for easy maintenance. Regardless of whether one or more river north flow ultraviolet disinfectors are selected in parallel, bypass pipelines and shut-off valves should be installed for maintenance purposes.