1、 Super constant temperature oil bath box/oil bath pot HH-W603Introduction:

In order to meet the increasingly high requirements of users for experimental temperature accuracy and fluctuation, the HH-W603 super constant temperature oil bath box/oil bath pot is an improved version of the HH-W602 super constant temperature oil bath pot by our factory. In addition to all the characteristics of the HH-W602, it has higher temperature control accuracy.

IISuper constant temperature oil bath box/oil bath pot HH-W603characteristic:

1. The inner shell and liner are all made of 304 stainless steel, and the surface of the shell is once again electrostatically sprayed, greatly improving its corrosion resistance.

2. Five digit digital display, dual screen display, display resolution up to 0.01 ℃.

3. Ultra fine glass fiber is used as insulation material, and no matter how high the working temperature is, the shell has no obvious thermal sensation.

4. Long oil pump design, the motor can work continuously under high temperature conditions.

5. The anti room temperature protection system has an over temperature sound and light alarm function in case of an accident, and also cuts off the heating power supply.

6. According to user requirements, a 485 interface can be configured to effectively connect to a computer or printer and achieve real-time recording function (optional additional 1000 yuan).

7. Low noise design, with no-load noise less than 35 decibels.

IIITechnical parameters:

1. Model: HH-W603

2. Temperature control range: room temperature -300.00 ℃

3. Temperature control accuracy: 0.01 ℃

4. Temperature wave degree: ＜ 0.02 ℃

5. Temperature uniformity: 0.02 ℃

6. Timing range: 1-99999 minutes

7. Heating power: 2000W

8. Circulating pump power: 40W

9. Circulating flow rate: 6L/min

10. Working size: 400 × 300 × 180mm

11. Opening size: 300 × 265mm

12. Groove depth: 180mm

4usage method:

1Before installing the equipment, the instrument should be placed on a flat workbench for visual inspection: the appearance should be undamaged, the instrument appearance should be intact, the wire insulation should be good, the plug should be intact, and the power switch should be flexible. Each device's power cord is connected to a single-phase three pole plug, with the electrode above the plug being the grounding electrode. Users must use a single-phase three pole power socket, and the grounding electrode of the power socket should be reliably grounded,Super constant temperature oilbathBefore using a 220V AC power supply, please ensure that the rated current of the power socket is not less than 10A and that it has a safety grounding device (please connect the grounding device to the working room when using).

2. Pour the oil into the tank, and the oil level should not be less than 10cm (depending on the temperature of use, please choose different oils such as methyl silicone oil, phenyl silicone oil, and high-temperature thermal oil).

3. Put it into a container or item that needs to be heated.

4. Connect the power supply and turn on the power switch. At this point, click the function key (set) on the thermometer, and the word Sp will appear. Then click △ or ▽ to select the temperature that needs to be heated. If you want to quickly adjust the temperature, you can use the ← key (left shift key) to adjust the hundred, ten, and individual positions respectively. After setting, click the set key again, and the word ST will appear. At this time, you can adjust the timing duration. The adjustment method is the same as before. Finally, click the set key again, and the above parameters will be saved. The instrument will run according to the set parameters.

5. Turn on the circulation pump switch, and the circulation pump will start working to ensure the uniformity of oil temperature.

6. After use, turn off the circulation pump first, and then turn off the power. The last set parameters will be saved.

5Precautions for use:

1. Due to the high temperature operation of the instrument, please be sure to wear protective gloves during operation.

2. If not in use for a long time, please empty the oil in the box and do a good job of maintenance.

3. The instrument must use a three hole safety socket and must have a safety grounding device, with a capacity not less than 10A.

4. To ensure the accuracy of oil temperature, different heating oils must be used for different operating temperatures.

Note: can be provided according to user requirementsAdd real-time temperature printing function, which can be connected to a computer through a 485 interface. Multiple temperature control functions can also be implemented according to needs, such as setting the temperature to 60 ℃, working for 50 minutes, then working at 80 ℃ for 70 minutes, working at 200 ℃ for 60 minutes, etc., that is, 30 working temperatures can be set separately. After completing a temperature parameter run, it automatically enters the next temperature parameter run.