Submersible slurry pump is an important equipment for deep well water lifting. The entire unit is submerged in water during use. Extracting groundwater to the surface is used for domestic water, mining emergency rescue, industrial cooling, farmland irrigation, seawater lifting, ship loading, as well as for fountain landscapes. Hot water submersible pumps are used for hot spring bathing, and residential areas can use geothermal heating as geothermal circulation pumps, with a wide range of applications.

Structural characteristics of submersible slurry pump:

1. The whole machine is a dry bottom pump type, and the motor adopts an oil chamber sealing method with a mechanical seal inside, which can effectively prevent high-pressure water and impurities from entering the motor cavity.

In addition to the main impeller, there is also a stirring impeller that can stir the sediment settled at the bottom of the water into turbulence and extract it.

3. The impeller and stirring impeller and other overcurrent components are made of high hardness high chromium cast steel, which is wear-resistant, corrosion-resistant, and has strong drainage ability, and can pass through larger solid particles.

4. The motor is submerged underwater without being limited by suction, with a high slag absorption rate and more thorough dredging.

5. The overall equipment is simplified, no auxiliary mixing or spraying devices are allowed, the operation is simple, and the total investment of the unit is reduced.

6. The stirring impeller is directly close to the sedimentation surface and the concentration is controlled by diving depth. In cases where the medium ratio is high, auxiliary devices can be installed to increase the medium concentration.

Conditions for use of submersible slurry pump:

1. The power supply is a 50Hz/380V three-phase AC power supply, and the capacity of the distribution transformer is 2-3 times the rated capacity of the motor.

2. The temperature of the medium shall not exceed 60 ℃ and shall not contain flammable or explosive gases.

3. The maximum weight concentration of solid particles in the medium is 45% for ash and 60% for slag.

4. Diving depth of the unit: not more than 20 meters, the minimum diving depth is based on submerging the motor.

5. The working position of the unit in the medium is vertical, with upper suspension positioning.

Scope of application of submersible slurry pump:

1. Absorb yellow sand from the bottom of rivers, lakes, seas, and other bodies of water.

2. Absorb sediment and sand from underwater sources such as rivers, lakes, seas, reservoirs, fish ponds, and power plants.

3. Absorb powder slurry from various stone processing plants.

4. Tailings transportation, various tailings, slurry, ore slurry, coal slurry, slag, slag processing, etc.

5. Absorb various solid slurry like substances processed by various water slurry operations.

6. Absorb the mud from the sinking well and water well.

7. Sedimentation cleaning of sedimentation tanks, hydropower stations, reservoirs, rivers, power plants, sunken wells, mines, and fish ponds.

8. Absorb various power plant fly ash and coal slurry.

9. Absorb various solid particles such as diamond sand, quartz sand, steel slag, and water slag.

10. Transport media such as sediment, slurry, coal slurry, sand and gravel containing large solid particles.

11. Gold mining sand, iron mining sand.