The URS-100 series static pressure liquid level transmitter is produced using original components of the German SENSE pressure sensor. It is mainly used for liquid level measurement in urban water supply and drainage, water treatment plants, reservoirs, rivers, oceans, oil storage tanks, as well as petroleum, chemical, power and other departments. The measured medium can be water, oil, acidic, alkaline and viscous liquids. The instrument outputs a two-wire 4-20mADC standard current signal, which has the advantages of advanced technology, high accuracy, stable and reliable quality, and easy installation and use. It is an ideal liquid level instrument in process detection and control systems. The URS-100 series static pressure level gauge transmitter measures the liquid level by measuring the static pressure generated by the height of the liquid. When the sensor part of the liquid level transmitter is put into the liquid medium, the sensor converts the static pressure of the liquid into a voltage signal, which is amplified and converted into a 4-20mADC standard current signal output.

Measurement range: 0~1m; 0~100m
Output signal: 4-20mADC two-wire system
Accuracy: 0.2 level, can provide 0.1 level
Medium temperature: -40~100 ℃
Environmental temperature: -30~80 ℃
Environmental temperature impact: Within the temperature compensation range, the zero position change is ≤± 0.3%/10 ℃
Range variation: ≤± 0.2%/10 ℃
Power supply voltage: 24VDC, depending on the load characteristics, the power supply voltage can reach 12-40VDC
Power supply voltage impact: Within the specified voltage range, the output conversion amount is less than 0.01%/1V
RF interference impact: When the transmitter is installed normally and the cover is tightly closed, the interference with RF frequencies between 27~1000MHz and field strength of 30V/m results in an output change of less than 0.1%
Long term stability: ≤± 0.3% (6 months)
Explosion proof mark: Intrinsic safety type: Ex ib Ⅱ CT4~T6
Explosion proof type: Ex d Ⅱ BT4
Explosion proof rating of enclosure: IP65
Connection form: URS-100 type - flange installation: DN50 PN1.0 convex surface
Flange standard: HG20598-97
Bracket installation, sanitary quick installation clamp: DN50
URS-100S type - threaded installation: G3/4 "