The standard fan-shaped nozzle is divided into:

Small flow 1/8 "-1/4" NPT or BSPT (M)

Medium flow 1/8 "-3/4" NPT or BSPT (M)

High flow 1 "-2" NPT or BSPT (M)

Design Features

The characteristics of H/U series nozzles are that they can produce high impact liquid column flow or sector spray with jet angle of 0 ° -110 °.

The spray produced by this nozzle is evenly distributed, and the size of the droplets is small to medium. When several nozzles are required to produce overlapping spray, the characteristic gradually thinning spray edge makes the spray coverage area evenly distributed.

The H-VV and H-VVL series universal fan-shaped nozzles have a flow rate of less than 3.9 liters per minute at a pressure of 3 bar and are equipped with external pipe threaded joints. Replace VV with DT in the order number to provide internal pipe threaded joints. H-VVL indicates that a filter will be installed inside the nozzle (there is no filter when connecting the internal pipe thread).

The H-U and U series universal fan-shaped nozzles have a rated flow rate of 3.9 liters per minute or higher at a pressure of 3 bar and are equipped with external pipe threaded joints. Replace U with DU in the order number to provide 1/8 inch and 1/4 inch H-U series nozzles with internal threaded pipe fittings.

General application

● Cooling and quenching

● Product washing

● Cooling of water

● Air and gas purifiers

● Scrubber

● Liquid cleaner

● Dust control

● Fire prevention