Spring impactorSC-CJ10

product overview

Our company's spring impactor is based on GB/T2423.44、GB/T2423.55、GB4706、GB4943、GB8898、GB7000、IEC60068-2-63、IEC60068-2-75、IEC60335 Made in accordance with the requirements of IEC60598 and other standards, it is suitable for conducting impact resistance tests on the shells, operating rods, handles, knobs, indicator lights, signal lights, and lampshades of household and similar electronic and electrical equipment and their accessories, as well as similar equipment, to evaluate the safety performance and strength level of the products.

Technical Parameter

1. The mass of the impact component is 250 ± 1g (below 1J), 500 ± 5g (2J);

2. Impact energy 0.2 ± 0.02N. m; 0.35±0.03N.m； 0.5±0.04N.m； 0.7±0.05N.m； 1.0±0.05N.m

3. Specification and Model Correspondence Table (Shell Made of Stainless Steel)

Technical parameters for spring impact:

Length: 211mm

Weight: 1250g

Outer diameter: 50mm

Hammer weight: 60g

Hammer radius: 10mm

Impact component: including the firing handle and hammer, weighing 250g, with the hammer made of white polyimide

Impact release force: less than 10N

Instructions for using a spring impact hammer:

According to relevant standards, fix the sample, select the impact energy and test position, pull the operating handle of the impactor until a "click" sound is heard, and the impactor is in the ready state. Place the impactor perpendicular to the surface of the sample and make contact with it, push the impactor to release it, and conduct an impact test on the sample.