DH-1200Specially designed largesalt spray test chamber

Specially designed large salt spray test chambermake, do, create, compose, write, etc.Scope of application: Salt water spray testing machine is designed for surface treatment of various materials, including coating, electroplating, organic and inorganic coatings, anodic treatment, anti rust oil and other anti-corrosion treatments, and then test their corrosion resistance to establish product quality.

oneSpecial large salt spray test chamber specifications

internal dimensions1200×1000×500 (L×W×H)mm

external dimensions1860×1260×1200(L×W×H)mm

Laboratory temperatureNSS ACSS 35 ℃± 1 ℃/CASS 50 ℃± 1 ℃ (neutral, acidic, alkaline tests can all be met)

pressure tank temperatureNSS ACSS 47 ℃± 1 ℃/CASS 63 ℃± 1 ℃ (neutral, acidic, alkaline tests can all be met)

Laboratory volume600L

Saltwater tank capacity80L

Compressed air pressure1.00±0.01kgf/cm2

spray volume1.0-2.0ml/80cm2.h

Relative humidity in the laboratoryOver 85%

twoCharacteristics of a specially designed large salt spray test chamber:

1. Imported gray white P.V.C board with a thickness of 10MM and special treatment for corrosion resistance. Place the plastic steel V-shaped frame and stainless steel pipe at an angle of 45 degrees to ensure that the specimen slides on all four wheels and can be pushed.

2. Exquisite workmanship, beautiful appearance, high transparency, pneumatic opening, lid plate thickness of 6MM.

3. Adopting an automatic/manual water filling system with automatic/manual water replenishment function when the water level is insufficient. The experiment is uninterrupted, meeting the diverse environmental requirements of customers.

4. Nozzle: the spray tower is equipped with a conical disperser, which has the functions of guiding fog, adjusting fog saving amount, and even fog falling.

5. Adopting high-precision multifunctional timer, the test time can be set with multifunctionality Equipped with power outage memory function, the product will continue to work according to the time before the power outage, until it completes the required time, to avoid redoing the experiment after the power outage.

6. During the salt spray experiment, steam direct heating method is used, which has a fast heating speed, uniform temperature distribution, and reduces standby time.

7. Two built-in fog collection tubes are used. Compared to traditional external models, it is less prone to damage.

8. Equipped with overload and short circuit protection. Prevent damage to the instrument and internal electrical control components in case of abnormalities.

9. The connection sealing groove between the inner and outer boxes adopts water sealing Prevent salt spray leakage.

10. The imported temperature controller uses digital display and PID control, with an error of ± 0.1 ℃.

11. Temperature range:

1: Laboratory temperature: 35 ℃ - pressure drum temperature: 50 ℃ (can be set arbitrarily)

2: Laboratory temperature: 47 ℃ - pressure drum temperature: 63 ℃ (can be set arbitrarily)

12. The reagent replenishment bottle adopts a hidden water level perspective window, which is easy to clean and not easy to break.

13. Heating rate:

1: Laboratory, room temperature ->35 ℃ for about 35 minutes

2: Pressure bucket, room temperature ->47 ℃ for about 15 minutes

14. Temperature accuracy: ± 1 ℃

Specially designed large salt spray test chamber applicable to international standards: RELATU STANDARDS CNS 3627, 3885, 4159, 7669, 8866; JIS D-0201、H-8502、H-8610、K-5400、Z-2371、ISO3768、3769、3770； ASTM B-117、ASTM B-268 B-268、GB-T2423、GJB150。

III Specially designed large salt spray test box control panel and electrical accessories:

Thermostat (Changzhou Huibang)2 of them

Pressure gauge (Japan)KKK) 1

3 indicator lights (Taiwan)

1 timer (Yudeno)

Control switch (Pin Yi) 5 pieces

SSR (Yangming, Taiwan) 2

3 relays (Omron Japan)

2 temperature sensitive lines (Hong Kong Baoguang)

2 pressure regulating valves (Yadeke)

4 solenoid valves (Shenchi)

10、 Specially designed large salt spray test chamberInterior Decoration

（A) 2 sets of spray tower

（B) 8 storage racks

（C) 10 storage sticks

（D) 2 standard measuring cylinders

（E) 2 collectors

（F) 2 glass nozzles

（G) 1 set of defogging system

11Enclosure:

Sodium chloride test drug（NacI) 2 bottles, 1 measuring cup, and 1 operating manual. 1 copy of guarantee letter