Product Introduction

When there are many impurities in the sewage, it is easy to cause pump blockage, especially in the upstream pump station of the sewage treatment plant. This innovative technology separates solid particles from wastewater and intercepts them in a solid-liquid separation well located in front of the pump well,Not blocking the pump chamber, no need to clean the water collection tank, fully enclosed and odorless,Only filtered sewage can flow into the pump well through the pump.Easy to operate and learn, intuitive operation data, small footprint, low operating costs, no need for dedicated on-site management; The installation cycle is short, saving most of the costs and saving time and effort in maintenance. Natural and environmentally friendly, with reliable and safe quality, it will not cause pollution or harm to high-quality farmland.

There are two solutions for handling miscellaneous items:One is to use a crushing grid to crush and intercept debris, and then focus on lifting the debris to the ground garbage bin. twoDirectly intercept and lift debris through the vertical lifting grille.

Advantages of Solid Liquid Separation Prefabricated Pump Station

The ball diameter of the water pump is less than 80mm, which can improve efficiency while reducing energy consumption and operating costs;

Maintenance and installation work can be carried out under relatively hygienic conditions, with the pump room being dry, clean, and odorless;

Hydraulic components do not come into direct contact with solid particles, resulting in less wear and tear;

The submersible sewage pump is equipped with an adjustable impeller, with a protection level of P68 (submersible);

No corrosion issues, not affected by the generated hydrogen sulfide.

The inlet cycle of the solid-liquid separation prefabricated pump station is as follows: sewage enters from the pump port, passes through the distribution chamber, and flows into two different separation tanks on the left and right. The cut-off float in the tank rises with the water level. After being filtered by the separation plate, the sewage flows directly into the pump body and enters the collection tank. Solid particles and fibers still remain in the separation tank.After the water is full, the collection tank is filled with filtered water (the separation tank is also filled with water, and the cut-off float blocks the inlet). The liquid level switch is triggered, and a pump is started to enter the drainage cycle.

The drainage cycle of the solid-liquid separation prefabricated pump station is as follows: after one pump is started, the water in the collection tank is pumped into the separation tank, washing away solid particles and fibers into the outlet pressure pipe,After one cycle, repeat it like this.