Fiber optic grinderProduct Usage:
Suitable for dual plane grinding and polishing of various hydraulic and pneumatic components, steering pumps, vane pumps, hydraulic motor components, automotive fuel pump components, air conditioning/refrigerator compressor components, oil pump nozzle components, engine components, watch components, high-precision bearings, seals, sealing rings, piston rings, hard alloy blades, ceramic valve cores, magnetic materials and other products.

Fiber optic grinderProduct performance:
1. Adopting variable frequency speed regulation, soft start and soft stop, stable and reliable.
2. By using hydraulic pressure to synchronize the lifting and lowering of the outer ring gear and sun gear, it is convenient to take and place workpieces while effectively utilizing the ring gear and sun gear.
3. The pressure is controlled by an electrical proportional valve closed-loop feedback, making pressure level setting more convenient and accurate. A separate slow down device is set up to effectively prevent the upper plate from crushing the thin and brittle workpiece, and it can also independently control the pressure.

Fiber optic grinderTechnical parameters:
1. Grinding disc specification (MM): φ 610 × φ 235 × 40
2. Minimum polishing thickness: 0.4mm (φ 75mm)
3. Maximum grinding diameter (mm): 30
4. Parallelism of machined part plane: 0.003mm (φ 125)
5. Maximum processing quantity of single piece planetary wheel: 4 pieces/diameter 75mm 3 pieces/diameter 100mm
6. Cruise parameters: metric M=2, Z=114
7. Number of cruise ships: 5
8. Host power: 4KW
9. Sun wheel drive motor: 0.75KW
10. Internal gear ring drive motor: 0.75KW
11. Lower grinding disc speed: 0~90rpm
12. Sand pump power: 370W
13. Pneumatic pressure: 0.5-0.6Mpa