Six dimensional vibration test bench

Six degree vibration machine model specification: Platform size: 500 × 500 × 600: mm

Fixed frequency (50HZ) BD/LD-XTL

Frequency modulation (1-600HZ) BD/LD-XTP microcomputer (1-600HZ) BD/LD-XPTP

Frequency modulation (1-3000HZ) BD/LD-XTW microcomputer (1-3000HZ) BD/LD-XPTW

Frequency modulation (1-5000Hz) BD/LD-XTT microcomputer (1-5000Hz) BD/LD-XPTT

1、 Product Usage:
Because any product may experience collisions and vibrations during transportation, use, storage, and other processes, which can cause defects in the product for a certain period of time and seriously affect its use and unnecessary economic losses, in order to avoid this situation, we need to know the vibration resistance life of the product or its components in advance.

IISix dimensional vibration test benchFunction:
1. Strength of the structure 2. Loosening of the binding material 3. Wear of protective materials 4. Damage to components 5. Poor contact of electronic components 6. Short circuit and intermittent instability of circuits 7. Deviation of standard values of various components 8. Screening of defective parts in advance 9. Finding resonance relationships between parts, structures, packaging, and transportation processes.

3、 Technical parameters:
1. Fully automatic six degree space integrated machine vibration table LD-XTP (front, back, top, bottom, left, right) (working on the same table)
2. Can move simultaneously on three axes, can move simultaneously on any two axes, can move continuously on two/three axes, can move randomly (bandwidth can be set), sine wave (half wave/full wave)
3. The size of the vibration table is L * W * H 500 × 500 × 5: mm. There are 25 10mm threaded holes on the table and 4 hook holes about 7cm long at each center of the four sides
4. Table size L * W * H 500 × 500 × 600: mm fully automatic six degree space integrated machine vibration table (up, down, left, right, front and back) (working on the same table)
5. Vibration function (type): ① Vertical ② Horizontal ③ Random vibration (adjustable bandwidth) ④ Sine wave (half wave/full wave)
6. Continuous actions {up and down/left and right/front and back any (two/three) groups} Together or continuously
7. Frequency modulation function (adjustable from 1 to 600Hz, 1 to 3000Hz, 1 to 5000Hz). Within the frequency range, any frequency cannot exceed one of the following two options (maximum acceleration<15g and maximum amplitude<4mm)
8. Sweep frequency function (adjustable from 1~600Hz, 1~3000Hz, 1~5000Hz) (up frequency/down frequency/time range) can be freely set to true standard back and forth sweep frequency
9. Programmable function/adjustable 1~600HZ, 1~3000HZ, 1~5000HZ 1-15 segments, each segment can be set arbitrarily (frequency/time) and can be cycled
10. Frequency doubling function/adjustable from 1~600HZ, 1~3000HZ, 1~5000HZ in 1-15 segments to increase multiples ① from low to high frequency ② from high to low frequency ③ from low to high and then to low frequency/recyclable
11. Logarithmic function/adjustable from 1~600HZ, 1~3000HZ, 1~5000HZ ① down to up frequency ② up to down frequency ③ down to up and then down frequency --3 modes Logarithmic/recyclable
12. Vibration waveform sine wave (half wave/full wave) maximum sine wave excitation force 2000kgf
13. Maximum load (50HZ, 1-600HZ, 1-3000HZ) 100kg (1-5000HZ) 75kg
14. Maximum acceleration adjustable to 0~15g (150m/s2)
15. Amplitude (adjustable range of MMP-P) can be adjusted from 0 to 4mm
16. Time control can be set at any time (in seconds)
17. Power supply voltage: 220V ± 20%/380V ± 20%
18. Maximum current: 10 (A)
19. Vibration motor power: 2.2KW/3.8KW
20. Cooling method: natural air cooling
21. Applicable temperature and humidity range and noise: temperature -10 ℃~+60 ℃/humidity 10%~95%/noise within 60 decibels

4Six dimensional vibration test benchCompliant with standards: Designed and manufactured strictly in accordance with GB/T2423.10-1995 and GB/T13310-2007 standards;

5、 Service commitment: 18 months warranty, free home delivery. After the installation and commissioning of the equipment is completed, relevant technical personnel will receive free operation training at the user's site, with no limit on the number of people.