Single machine pulse dust removal equipment is a new type of pulse dust collector improved on the basis of bag filter. It combines the advantages of various pulse jet dust collectors with chamber back blowing, overcomes the disadvantages of insufficient cleaning intensity and uneven distribution of inlet and outlet air, and expands the application range.

1、 The cleaning and extinguishing mechanism is a method of using an electric motor to drive the edge rod mechanism, causing the filter bag to shake and the inner surface of the filter bag. Its control device has two types: manual control or automatic control. The length of the cleaning time is adjusted by a time relay (the electric control box is matched with the dust collector);

2、 The ash door adopts two types of structures: suction door and ash door, which facilitate dust collection.

3、 The fan components adopt universal standard fans for easy maintenance and replacement, and adopt seismic isolation facilities with low noise;

4、 The filter material selected is a "729" cylindrical filter bag, which has good filtration effect and long service life:

Single machine pulse dust removal equipment has the advantages of small size, large processing air volume, compact structure, and easy use. This series of single machine dust collectors has six specifications, divided into three types: A, B, and C. Type A does not have a dust door, type B does not have drawers, and type C neither has a dust door nor drawers; The lower addition is directly connected to the dust collector at the top of the warehouse, material bin, belt transportation and other places according to requirements for on-site dust removal, and the dust is directly recovered.

Single machine pulse dust removal equipment is used when dusty gas enters the dust collector through the air inlet, first encountering the inclined plate and baffle in the middle of the air inlet and outlet, and the airflow turns to flow into the ash hopper. At the same time, the airflow speed slows down, and due to inertia, coarse particles of dust in the gas directly flow into the ash hopper. Playing a role in pre dust collection, the airflow entering the ash hopper is then deflected upwards and captured on the outer surface of the filter bag through the filter bag equipped with a metal skeleton inside. The purified gas enters the upper clean room of the filter bag chamber and is collected at the air outlet for discharge. During the process of purifying the dusty gas through the filter bag, as time increases, more and more dust accumulates on the filter bag, increasing the resistance of the filter bag and gradually reducing the processing air volume. To work normally, the resistance should be controlled within a range (140-170 mm water column). Once the range is exceeded, the filter bag is cleaned. During cleaning, the pulse control instrument sequentially triggers each control valve to open the pulse valve. The compressed air in the air bag is sprayed from each hole of the spray pipe through the Venturi tube to the corresponding one. Inside the filter bag, the bag instantly expands rapidly, causing the dust accumulated on the surface of the filter bag to fall off, The filter bag returns to its initial state. The dust falls into the ash hopper and is discharged from the machine through the ash discharge system. As a result, the dust accumulated on the filter bag is periodically pulse blown to clean the dust, allowing the purified gas to pass through normally and the dust removal system to operate.