1、 Product Name:Battery Explosion proof Test Chamber

2、 Product model:GX-FB-100T

IIIBattery Explosion proof Test ChamberSpecifications:

1Test box size:W800×D800×H800mm.

2Box structure:

2.1The explosion-proof box is constructed with double-layer fire-resistant steel plates, with a gap between the two layers of steel plates and filled with special fire-resistant materials;

2.2Outer box: cold-rolled sheet and treated with baking paint;

2.3Inner box:SUS#201Stainless steel, treated with full circle welding and welded with integral square tubes to enhance explosion-proof performance.

2.4Storage rack: The equipment is equipped with movable storage compartments and shelves1Set, the height of the partition can be adjusted as needed to divide the equipment box into2Layer.

2.5Internal box battery support material: To avoid direct contact between the battery and PTFE, the box is placed with a movable storage rack and a large marble slab for placing test batteries.

3Equipment box door:

3.1The box door is a single door, double layered door, and the inner box door is made of stainless steel material with silicone tightening strips. The front side has an observation window, and there is a filling layer between the box doors.

3.2Observation window: The front of the box door has an observation window made of double-layer tempered glass, with explosion-proof glass film attached to both sides of the glass.

3.3Door lock: A specialized door lock for large explosion-proof equipment, with strong explosion-proof hinges attached to the box.

4Test holes: open on both sides of the box1A circular test hole facilitates the connection of various charging and discharging test lines.

5.5Box control part:

5.5.1There is a separate testing panel in the testing room to control the exhaust of each testing room. During testing, the exhaust fan inside the box can be automatically turned on to exhaust smoke.

5.5.2The testing room is equipped with high brightness explosion-proof lighting, which should be easy to observe the status of the test samples. The explosion-proof lights should be easy to replace and clean.

6Equipment exhaust: The side of the testing room is equipped with exhaust fans and reserved exhaust duct outlet positions, which are externally connected to the laboratory's strong exhaust fan to quickly discharge the test exhaust gas.

7Pressure relief and explosion relief device: The rear of the testing room is equipped with a pressure relief and explosion relief door, which can automatically release pressure when the pressure inside the box is too high.