The aluminum cap rolling machine is a desktop three blade cyclone cap rolling machine with a stainless steel appearance, which is safe and convenient to operate. During operation, the capped bottles do not rotate and are evenly distributed120°Three whirlwind knives rotate to seal the lid, and the handle is designed with a spring structure. The distance between the three knives can be fine tuned, making it highly adaptable and resulting in a high yield of lid products

Produced by our factoryElectric capping machineThe whole machine has a novel and beautiful appearance, a reasonable design, and is lightweight. The tabletop and protective cover are both made of stainless steel material, with high roller strength, wear resistance, long service life, and good sealing of the rolled aluminum bottle caps. It is suitable for aluminum cap of oral liquid bottle, aluminum cap of 2ml bottle, aluminum plastic cap of madam oral liquid bottle, aluminum cap of penicillin bottle, aluminum cap of spray tube, aluminum cap of spray tube, etc. It is the most ideal capping equipment for mass production in major hospitals, pharmaceutical factories, and scientific research institutions across the country.

Main parameters of electric capping machine:
Capping speed:20-40 bottles per minute
Motor power: 120W (single unit 220V)
Volume: 450 × 400 × 600mm
Weight: 35kg

Electric capping machineAdjustment of the upper arm when rolling bottles of different specifications

This machine can be used for rollingWhen using a bottle cap of 5-500ml, simply place the bottle of that specification on a tray, hold the crossbar with one hand, and loosen the nut on the left side of the crossbar with the other hand to lower or raise the crossbar until the capping head is about 20mm from the bottle cap. Tighten the nut and then use the randomly provided hex wrench to tightly secure the support ring against the crossbar and lock it in place. (Note: When tightening, pay attention to aligning the capping head with the bottle cap position.)

Electric capping machineVAdjustment of shaped support block

Put the bottle downIn the V-shaped bracket, loosen the two screws on the support block, move the bottle and the lower V-shaped block together until the capping head is aligned with the bottle cap position, and then tighten the two screws on the V-shaped block.

Electric capping machineSpecific operating methods

1. Place the bottle filled with liquid and capped onto the lower tray, and lean against itOn the V-shaped support block, hold the bottle with one hand and pull the handle downwards with the other hand towards the back. At this point, the tray lifts the bottle upwards until the bottle cap is tightly pressed against the capping head.

2. After the bottle cap is tightly pressed against the capping head, the three continuously rotating capping blades rotate several times to tighten the bottle cap. The motor must run clockwise.

3. Push the handle forward to make the rolled lid return to its original position with the tray. The entire operation process is completed. Repeat the above operation for each bottle cap rolled in the future.

Electric capping machineAdjustment of the capping head

This machine is equipped with multiple capping heads, which can be selected according to the size of different bottle caps. Before formal use, you can try using a bottle.

1. The lid is not tightly rolled, you can unscrew the locking nut of the lid head in a counterclockwise direction to remove the upper lid head, and then tighten the upper fixing nut.

2. The lid is rolled too tightly and there is a phenomenon of unscrewing the bottle cap. You can unscrew the locking nut of the upper rolling cover head and screw it clockwise into the upper rolling cover head, then lock the upper fixing nut.

3. The lower edge of the bottle cap cannot be tightened, and the eccentricity of the three rolling blades can be adjusted appropriately according to the actual situation. If the bottle is too tight and crushed, the eccentricity of the three rolling blades can be adjusted appropriately.

Electric capping machinePartial bottle cap adjustment reference value