Semiconductor CK-S650 series wafer box, wafer box RFID card reader

CK-S650 is a low-frequency RFID tag reader based on radio frequency identification technology. It is powered by 24V and operates at 134.2kHz. It has one input IO, one output IO, and a common IO pin. It is equipped with three external rotary encoder switches (SW1, SW2, SW3) to easily modify the required working status to meet more on-site work needs.

This card reader supports standard industrial semiconductor materialsHSMS, Modbus TCP protocolSECSAgreement andModbustuProtocol, while also supporting1andNProtocol, convenient for users to apply to semiconductor processing controllers orPLCWaiting in the system. The device is equipped with three external mode switch selectors, making it convenient for users to directly set the working mode, communication rate, and device address. The card reader integrates the RF communication protocol, and users only need to send and receive data through the communication interface to complete tag reading and writing operations, without worrying about complex RF communication protocols.

Card reader selection

Product features

◆ Power consumption:1.5W

Communication protocol:HSMSTheSECS、1 AgreementNAgreementMODBUS RTU/TCP

◆ Communication interface:RS485/RS232TheRJ45

◆ DC power supply:24V(with reverse connection and overcurrent protection)

◆ Working frequency:134.2kHz

◆ Reading and writing card distance:0~80mm

◆ Working humidity:10－90% RH

◆ Working temperature:-25℃－+70℃

◆ Working mode:HDX

◆ RF standard:ISO11784/11785

◆ Support tags:SIC7999，TIlabel(RI-TRP-DR2B-30，RI-TRP-DR2B-40，TRPGP40ATGC，TRPGR30ATGA，TRPGR30ATGB)

Interface Definition

Product features

◇ Customizable working modes：By setting the rotation encoding switchSW1makeCK-S650Support different protocols.

◇ Customizable baud rate and verification method：By rotating the encoding switchSW2Can be setCK-S650-PA60SCommunication occurs at different baud rates and verification methods.

◇ Adjustable heartbeat time：By rotating the encoding switchSW2Can be setCK-S650-PA60EThe heartbeat time.

◇ Configurable node codes：By rotating the encoding switchSW3System node numbers can be set.

◇ Comes with signal indicator light：Can indicate the system operating status and tag read/write operation status.

◇ Read and write low-frequency tag data：Distance has been increased.

◇ Supports multiple communication interfaces, simple and fast wiring

RS232Wiring: withPCUsing standardDB9Interface.

RS485Wiring: When multiple devices are mounted on the bus, it is recommended to connect them120Ω terminal resistor

Ethernet wiring:Connected via Ethernet cable

Morning Control Intelligent Low Frequency Card ReaderCK-S650 is an RFID intelligent device specifically developed for the upgrading of the semiconductor industry structure,useThe CK-S650 series reader can complete the intelligent upgrade and transformation of production lines, adding a helping hand to smart workshops and automated production, greatly reducing labor costs and improving production efficiency.